Product Details
Company Profile

Solid Carbide Round Bar Abrasion And Corrosion Resistant With Inner Straight Hole

Abrasive And Corrosion Resistance Solid Carbide Rods With Inner Straight Hole

Production Features

1. we are using 100% WC and the raw matearils of CO.

2. High hardness HRA89-93 ,good bending strength TRS 2800-4200.N/mm2

3. Long probation,stamping.

4. Has good wear resitance.

5. Professional manufacturer for more than 10years experience.

6. ISQ 9001-2015 Quality Control System.

7. With the HIP sintered technology,the structure of tungsten carbide is more uniform,more dense,the TRS can be raised more than 20%

Application of tungsten carbide rod

1. Used for making various kinds of carbide solid tools and cutting tools, such as drills, end mills, thread taps, rotating file,etc. A good material for general-purpose. Suitable for machining carbon steel, cast irons, stainless steel, heat-resistance steel, nickel based alloys and titanium alloys.

2. Wear Parts

3. Wire Guiding

4. Stamping/heading dies

Detail Specification:

Material:	Tungsten Carbide
Size:	Dia12Dia8100mm, Dia16Dia6500mm, Dia25Dia12400mm Various size
Size Tolerance	Blank (+0.2/0) or as customer's request
Grade:	YG8/YG10/YL10.2
Grain Size:	0.8-1.2μm
Application:	wear parts, wire guide
Properties:	Long life,good wear resistance and high hardness.
Certificate:	ISO9001:2015
Cpmposition:	WC+Co/WC+Ni

Some Size list

Size range(DiaXL mm)	Blank Tolerance
Size range(DiaXL mm)	OD(mm)	ID ( mm)	L(mm)
OD2*ID0.2/0.25/0.3/0.4	+0/+0.3	+-0.05	0/+2
OD3*ID0.15/0.2/0.3/0.4/0.5/0.6...	+0/+0.3	+-0.05	0/+2
OD4*ID0.15/0.2/0.3/0.4/0.5/0.6...	+0.3/+0.6	+-0.05	0/+2
OD6*ID0.2/0.3/0.4/0.5/0.6./1.0..	+0.3/+0.4	+-0.05	0/+2
OD7*ID0.2/0.3/0.4/0.5/0.6./1.0.....	+0.3/+0.6	+-0.05	0/+2
OD8*ID0.2/0.3/0.4/0.5/0.6./1.0....	+0.3/+0.6	+-0.05	0/+2
OD9*ID/0.2/0.3/0.4/0.5/0.6./1.0/1.2..	+0.3/+0.6	+-0.05	0/+2
OD10*ID/0.2/0.3/0.4/0.5/0.6./1.0....	+0.3/+0.6	+-0.05	0/+2
OD12*ID0.5/0.6/.........8/10...	+0/+0.5	+-0.05/+-0.3	0/+2
OD14*ID0.5/0.6/.........8/10...	+0/+0.5	+-0.05/+-0.3	0/+2
OD25*ID6/8/10/12.	+0/+0.5	+-0.05/+-0.3	0/+2
For more size, please kindly contact us. we are able to custom-made according to drawings.

Carbide Rods Grades for Cutting Tools

Grade	ISO Grade	WC%	Co%	Grain Size μm	Hardness (HRA)	Density g/cm3	T.R.S. N/mm2	Application
YG6X	K10	94	6	0.6-0.8	14.9	92	2000	Suitable for processing Chilled cast iron, heat-resistant alloy steel, and fine process of common cast iron
YL10.2	K25-K35	90	10	0.6-0.8	14.5	92.5	3800	Wear resistance and strength comparatively higher,suitable for PCB micro drills,for making drills,end mill,reamer,taps,burrs etc.
ZF06X		92	Co-6% TaC-2%	0.6	14.8	91	1300	suitabble for cutting tools

Carbide Rods Grades for Moulds/Dies

Grade	ISO Grade	WC%	Co%	Grain Size μm	Hardness (HRA)	Density g/cm3	T.R.S. N/mm2	Application
YG8	K30	92	8	1.2	14.6	89	2320	Suitable for the roughening of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG6	K20	94	6	1.2	14.9	89.5	2150	Good Wear resistance, used for hard wood,processing original wood,aluminum section bar,brass rod and cast iron.
YG15		85	15	1.6	14.1	86.5	2400	Medium grain, for mining tools, cold heading and punching dies
YG20		80	20	1.6	13.7	85	2500	suitable for stamping dies such as screw, watch parts
YG20C		80	20	1.8-2	13.6	82	2200	Suitable for colding heading dies, stamping dies such as shaft ,standard parts

Cutting steel class grade

Grade	ISO Grade	Density g/cm3	Hardness HRA	T.R.S N/mm2	Application
YT5	P30	11.50-13.20	90.0	1750	Suitable for heavy duty cutting of steel and cast steel and for a low-speed and medium-speed and a big feed-rate roughing operation under unfavorable machining conditions
YT14	P20	11.20-11.80	91.0	1550	Suitable for semi-finishing and finishing machining of steel and cast steel, using a medium feed-rate
YT15	P10	11.10-11.60	91.5	1500	Suitable for semi-finishing and finishing machining of steel and cast steel and a medium feed-rate and a rather high cutting speed is to be recommended
YC40	P40	13.00-13.40	89.5	1860	Suitable for heavy duty cutting of steel and cast steel with a possible big feed-rate and for face milling as well.
YW1	M10	12.85-13.40	92.0	1380	Suitable for semi-finishing and finishing of stainless and ordinary alloyed steel
YW2	M20	12.65-13.35	91.0	1680	Suitable for semi-finishing and finishing of stainless and low alloyed steel, mainly used for machining of trains' wheel hubs
YW3	M10	12.85-13.10	92	1420	It is suitable for semi-finishing and finishing of stainless and ordinary alloyed steel

We guarantee:

* We are real factory in Zhuzhou

* Manufactured with100% tungsten carbide raw material

* Comply with ISO 9001:2015 Certification

* Rich experience of over 10 years

* Advanced technology , automatic pressing , HIP sintering

* Full ability to accept OEM & ODM orders

* Strict inspection for quality of raw material and finished products

For more detail size,pls email us,thanks

Product Tags:

tungsten carbide composite rods

tungsten alloy rod

Solid Carbide Round Bar Abrasion And Corrosion Resistant With Inner Straight Hole

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Zhuzhou Zhenfang Yaguang Tungsten Molybdenum Co., LTD.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Solid Carbide Rods
Brand Name:	zhenfang
Model Number:	ZF-TCH196
Certification:	ISO9001:2015
Place of Origin:	Zhuzhou,China
MOQ:	5KGS
Price:	Negotiable
Payment Terms:	L/C, D/A, D/P, T/T, Western Union
Supply Ability:	20tons/month
Delivery Time:	3-15 days
Packaging Details:	standard packing suitable for overseas shipment: outside carton or plywood case with inner plastic box packing
Size:	Dia12Dia8100mm Dia16Dia10400mm various size
Application:	wear parts, wire guide
Surface:	unground based on requirement
Material:	100% virgin WC+Co
Color:	Grey
Shape:	Round Rod
Hardenss:	HRA88
Grade:	YL10.2/YG8/YG10