PC1213 Hammer Stone Crusher 300 - 350 TPH Rock Crusher Production Line

PC1213 Hammer Stone Crusher 300 - 350 TPH Rock Crusher Production Line

Parameters of Heavy Hammer Crusher:

Product Descriptions of Stone Hammer Mill:

1. The hammer crusher crushes through the collisions between high speed hammer and materials, and the hammer crusher have good quality features like simple structure, high reduction ration, high efficiency, etc.
2. The PC hammer crusher(hammer mill) were suitable for both dry and wet crushing of brittle, medium hard materials for the mining, cement, coal, metallurgic, construction material, road building, and petroleum & chemical industries.
3. The hammer crusher has good quality features like simple structure, high reduction ration, high efficiency, etc.

Working Principles of PC1213 Stone Crushing Equipment:

1. The gap of the grate in heavy hammer crusher can be adjusted for changing the discharging size to meet the different requirements of users. The main working parts of the heavy hammer crusher is rotor with hammers, the rotor consists of the main shaft, disk, pin roll, and hammer.
2. The motor makes the rotor rotate quickly in the crushing cavity, while the materials are put into the crusher and then crushed by the hammer with high speed motion, strike, impact, shear, and grind.
3. There is a sieve plate at the bottom of the rotor, the crushed materials whose size is below the mesh size will be ejected through the sieve plate, while whose size is larger than the mesh size should be continuously impacted and ground by the rotor and finally be ejected out of the heavy hammer crusher.

Working Flows of Rock Hammer Crusher:

1) Feeding: The material is loaded into the vibrating feeder by the forklift, and the gravel is evenly conveyed into the crusher by the vibrating feeder.
2) Crushing: the stone is crushed by a jaw crusher, and the impact crusher is crushed and then transferred into the vibrating screen.
3) Screening: After the sieve is sieved out of the gravel of 40mm or less, it is sent into the sand making machine, and more than 40mm is re-crushed.
4) Sand making: gravel below 40mm is broken into sand in sand making machine.

Features:

1) Wear parts are wear-resistant, impact resistant and extend equipment life
2) The chassis can be turned over and the maintenance is more convenient
3) High yield, granules account for more than 85%, meeting the requirements for use
4) The feed port is large, the crushing chamber is high, and the high hardness material can be broken.
5) Low investment cost, novel design and efficient operation
6) Double pulley rotor for increased inertia and stability of the rotor

Henan Mind Machinery Equipment Co., Ltd. established in 2000, is located in China construction machinery city- Zhengzhou, the capital of Henan province.

Our company engaged in the dry powder mixing equipment R&D, production, sales and construction, providing most efficient turnkey solutions to our clients in green building energy-saving insulation and green wall (building) materials manufacturing equipment, production technology and construction program.

In addition, we have also obtained some authorized certifications, such like ISO 9001, CE, etc. OEM and ODM orders are acceptable for us. Welcome to contact us and talk your requirements with our Customer Service Center.

Our Main Products: