Automobile Parts Ultrasonic Cleaning Equipment 53L Tank 1500W Heating Power

Automobile Parts Ultrasonic Cleaner Machine 53L With 1500W Heating Power

In automobile maintenance and repair, cleaning of parts is a relatively important task. After each assembly is disassembled into parts, the oil, carbon and scale of the parts must be removed, so that the assembly and vehicle assembly can be smoothly carried out. Remove the dirt, wash the inside of the car and its assembly and parts, you can find problems (such as abnormal wear, cracks, loosening, etc.) in time, and take corresponding measures to prevent hidden dangers.
Automobile parts cleaning methods are divided into washing, ultrasonic cleaning, solvent washing and chemical washing. Contamination of parts includes: external deposits, residues of lubricating materials. As these dirt have different properties and characteristics, and often have high adhesion, the cavitation of ultrasonic waves in water can loosen and peel off these attached oil stains. The use time is short, and the damage to parts is small.

Specificatoin:

From 10 galles to 200 gallons ,size could be customized

Images of this model:

The whole set machine including:

1* cleaning machine

1* lid

1* basket

Similar models with different tank volume:

Cleaning effect contrast:

Allication in Engine
After a long period of use, there will be a lot of oil on the engine surface. If you do not remove these oils, it will affect the use of the car, reduce the service life of the car, and even have certain safety hazards. Therefore, engine cleaning is very necessary.

Traditional cleaning is the use of manual cleaning or high pressure water guns. However, manual cleaning is difficult to clean some blind holes and gaps in the engine; the effect of high-pressure water gun on oil pollution is not very significant.

The effect of ultrasonic cleaning is very remarkable. The oil on the surface and the oil on the gap can be effectively removed under the impact of tens of thousands of ultrasonic waves. And with the application of the filtration circulation system, it can effectively filter out the concentrated treatment of oil, which greatly saves water resources and has negligible impact on the environment.

Skymen Technology Corporation Limited, which is a leading manufacturer and national high-tech enterprise, was founded in 2007. There are 2 factories of Skymen, one is located in Shenzhen, closed to HongKong. And the other is located in Shaoguan, Guangdong province, China.

We have been focusing on R&D of ultrasonic equipment & cleaning solution for more than 17 years with over 300 employees and plant size 39,000 square meters. Products include CE, FCC, PSE, KC and other safety certification, as well as ROHS,PAHS, REACH, SCCP environmental certification, and passed the factory audit BSCI, ISO9001 quality management system.

There are more than 200 patents & certificates in total. Our products range covers industrial ultrasonic cleaner, homeuse ultrasonic cleaner, commercial ultrasonic cleaner, full-automatic ultrasonic cleaning machine, ultrasonic transducer rod series, ultrasonic transducer plate series, tunnel cleaning machine, large hydrocarbon ultrasonic cleaning equipment with PLC, large ultrasonic cleaning equipment with vacuum implementation, etc.

2023 Skymen self-built Shaoguan industrial Park

2020 New Factory Industrial Park

Shenzhen R&D Basement

Shenzhen Marketing Center