Beam type gas injection random packing support plate tower internal

Beam type gas injection random packing support plate tower internal

The beam type support plate is composed of several beam support plates, which is a detachable structure.

Features of beam type random packing support plate:

• Good rigidity and large capacity.
• The pressure drop of gas through the support plate is small.
• The gas and liquid flow channels are separated, and the gas phase is sprayed to the packing layer through the side opening holes, while the liquid phase flows to the lower packing layer through the opening at the bottom of the support plate, so the gas and liquid are evenly distributed
• The free cross-sectional area of gas-phase flow is large. Generally, the free cross-sectional area can reach more than 90% of the cross-sectional area of the tower, so a higher gas-liquid load is allowed.

The support beam arrangements according to tower inner diameter (part table):

When the tower inner diameter is over 2600mm, main bearing beam under the beam supporting plate is required.

The opening size of the support plate is generally 12mm * 45mm long round hole. When the size (diameter or height) of the bulk packing is smaller than the opening size of the support plate, lay one or two layers of wire mesh on the upper surface of the support plate, and then stack the packing.

Beam type random packing support plate position and simple drawing:

Welcome your contact with your private tower internals plan or ideas!

 We do business in this line sinice 2009. We have the lower price , high quality, prompt delivery, beautiful packing , and advance tehonogy, we are  able to meet all our customers' need .

Meanwhile OEM /ODM services are available, Welcome friends from all walks of life come to visit, guidance and business negotiation.