three input three output
Keywords: Encoder | differential signal | pulse | isolated
converter | Signal Conditioner
Features:
>> Differential signal/pulse signal isolated transmitters
>> Support A, B, and Z three-phase differential simultaneous
conversion
>> No change the original waveform frequency, response speed
is over 500KHz
>> Three-isolation:signal input/Power/signal output 3000VDC
>> Power supply: 5V, 12V, 15V or 24V DC single power supply
>> Low cost, high small size, ease of use, reliability
>> Standard DIN35 rail mounting
>> Industrial Temperature Range: - 45 ~ + 85 ℃
Application:
>> Encoder differential signal isolation, acquisition and
conversion
>> Differential encoder 24V square wave pulse signal
transduction
>> Servo encoder signals to the PLC differential
>> Pulse signal amplification and shaping
>> Ground interference suppression
>> Motor speed monitoring system
>> Speed measurement and alarm
>> Signals without distortion transmission and transmission
Products Listing:
DIN11 IAP – S□ - P□ – O□
Input Signal | Power Supply | Output Signal |
input | code | Power | code | output | code |
| | 24VDC | P1 | output level 0-5V | O1 |
Single signal input, peak value ( VP-P): 5V | S2 | 12VDC | P2 | output level 0-12V | O2 |
Single signal input, peak value ( VP-P): 12V | S3 | 5VDC | P3 | output level 0-24V | O3 |
Single signal input, peak value ( VP-P): 24V | S4 | 15VDC | P4 | Open collector output | O4 |
5v differential pulse signal input | S5 | | | differential signal | O5 |
user-defined | Su | | | user-defined | Ou |
products samples:
1: Input: Encoder differential signal Power supply: 24V Output:
0-5V level
Type No.: DIN11 IAP-S5-P1-O1
2: Input: Encoder differential signal Power supply: 12V Output:
0-24V level
Type No.: DIN11 IAP-S5-P2-O3
3: Input: 0-5V level Power supply: 24V Output: 0-24V level
Type No.: DIN11 IAP-S2-P1-O3
4: Input: 0-5V level Power supply: 12V Output: open collector
Type No.: DIN11 IAP-S2-P2-O4
5: Input:user-defined Power supply: 24V Output: user-defined
Type No.: DIN11 IAP-Su-P1-Ou
6.Input:0-24V Power supply: 24V Output: differential signal
Type No.: DIN11 IAP-S4-P1-O5
Application example:
(connect Mitsubishi servo encoder wiring diagram)
more details,please check:
http://www.wayjun.net/Datasheet/Signal/speed%20signal%20converter.pdf
