Product Details
Company Profile

IEC60529 IP5/6 Sand And Dust Environmental Test Chamber 1000L

IEC60529 IP5/6 Sand and Dust Environmental Test Chamber 1000L

Standards & Clauses:

IEC60529:2013 “Degrees of protection provided by enclosure (IP code)” IP5 & IP6

IEC60598-1:2014 “Luminaries-Part1: General requirements and tests”

Technical Parameters:

Control & operation	PLC & touch screen
Chamber size	Inner size: WDH=600600600 mm	Inner size: WDH=800800800 mm	Inner size: WDH=100010001000mm
	External size: WDH=12009001650mm	External size: WDH=13009701700 mm	External size: WDH=150014001900 mm
Square-meshed sieve	Nominal wire diameter: Ф50µm,nominal width of a gap between wires: 75µm
Talcum powder	Dry talcum powder which can pass through the square-meshed sieve
Dust concentration	The amount of talcum powder in the test chamber is 2Kg /m³
Air velocity	≤2m / s
Air flow meter	1-25L/min, digital display
Test time	1s~99 H 59 m 59s, can be preset
Dust blowing period	Stop/blowing time: 1s~99 H 59 m 59s, can be preset
Blowing sequence	OFF-ON-OFF
Vacuum pumping speed	60-600L/min
Blower	Full plastic centrifugal fan
Heating device	New ceramic heating frame
Safety protection	Phase sequence protection, leakage protection, over temperature protection, abnormal protection

Details:

a. Fine dust: below 75um

b. Coarse dust: below 150um

c. The dust concentration in the chamber and pipeline is 2kg/m³

d. Air velocity: less than 2m/s (adjustable)

e. The amount of talc powder: Prepared according to standard requirements (prepared by user, at least 2KG for the first time, as talc powder is not allowed to ship internationally)

f. PLC and touch screen intelligent control system

g. PT100 sensor

h. Over temperature protection function

i. Power phase loss protection

j. Leakage circuit breaker

k. Power supply: Three phase AC380 V / 50Hz

l. Door: Tempered glass door

m. Vacuum pump: 60-600L/H

n. Controller: using programmable controller (this controller has the following multiple arbitrary setting control functions):

① Dust blowing time (stop, blowing) h/m/s adjustable

② Cycle period: arbitrarily adjustable

③ Preset test time: 0s～999h99m99s, arbitrarily adjustable

④ Power supply: off-on-off

o. Metal screen size: nominal wire diameter 50um, nominal distance between wires 75um or less than 150um

p. Fan: All plastic centrifugal fan

Remarks: This test chamber can meet the requirements of degrees of protection provided by enclosures of household appliances, low-voltage electrical appliances, automobile, motorcycle parts and etc.

Structure and Panel Description:

The structure and working principle of the dust test chamber are the same as IEC60529-2013, and equipped with an additional airflow heating device, in order to facilitate the use in the case of low ambient temperature or high humidity. When the system is working, operator first puts the dried standard talc powder (2kg/M3) into the dust test chamber, then puts test sample into the dust test chamber, and then starts the fan to make a high-density dust mist formed in the chamber until the preset test time is reached (Usually 8h).

Product Tags:


*From:	Your email address is incorrect!
*To:	Sinuo Testing Equipment Co. , Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Environmental Test Chamber
Brand Name:	Sinuo
Model Number:	SN441
Certification:	Calibration Certificate (Cost Additional)
Place of Origin:	China
MOQ:	1
Price:	Customized
Payment Terms:	T/T
Supply Ability:	20 sets per month
Delivery Time:	30 Days
Packaging Details:	Plywood
Applied Standards:	IEC60529 and etc.
Air Velocity:	≤2m / s
Vacuum Pumping Speed:	60-600L/min
Air Flowmeter Range:	1-25L/min
Dust Concentration:	2Kg /m³
Coarse dust:	Below 150um
Working Volume:	1000L, can be customized
Fine dust:	Below 75um