Product Details
Company Profile

3V SMD White Light 4014 LED Chip High Cri Led Chip For Computer

Application:

After power on, the backlight lights up. If all the LCD pixels on the screen are "turned on", the backlight enters the human eye without blocking. At this time, the screen is all white. When displaying an image, after calculating the on-off state of each pixel through AD conversion of the display signal, directly drive the signal to the specific pixel and control the "on-off" of the liquid crystal pixel to light, the image on the screen can be generated on the screen. At this time, the image on the screen is like an advertising light box, and the light emitted by the lamp tube in the light box enters the human eye through the patterned film.

Optimized for narrow light guide and backlight applications. Silicone, volume casting and volume emitter LED chip provide uniform radiation mode.

Flat and compact size, good light guide coupling

Wide range of color temperature: 2700 K ~ 6500 K

Industry standard package size

Package: SMD epoxy resin package

Typical radiation: 120 ° (Lambert emitter)

Color: CX = 0.28, cy = 0.26 (according to CIE 1931 standard (● multi fluorescent white))

CRI: minimum 80

ESD: 2 kV (in accordance with ANSI / ESDA / JEDEC js-001 standard (HBM, class 3b))

3V 60MA 0.2W 4014 26-28LM white light PPA SMD LED CHIP For indoor lighting

Quick details:

Input Voltage(V):	3V
Warranty(Year):	2-Year
Type:	Smd Led Chip 4014
Lighting solutions service:	Lighting and circuitry design
Luminous Efficacy(lm/w):	150lm/w
Lifespan (hours):	50000
Working Time (hours):	20000
Chip Material:	INGAN
Emitting Color:	2700-6500K
Power:	0.2W
Viewing Angle(°):	120 Degree
Color Rendering Index(Ra):	80
Packing bag:	220*240nm
Place of Origin:	Suzhou ,jiangsu
Application:	LED STRIP
Package Type:	Suface Mount Package
Forward Current:	60MA
Size:	4.01.40.65mm
Packing:	4000 Pcs/Roll

Product specification:

Package Structure

Absolute Maximum Ratings

Item	Symbol	Absolute Maximum Ratings	Unit
Forward Current	IF	60	mA
Reverse Voltage	Vr	5	V
Pulsed Forward Current	IFP*	80	mA
Power dissipation	PD	0.2	W
Operating Temperature	TOP	-40~85	℃
Storage Temperature	TST	-40~85	℃
Electrostatic Discharge	ESD	2000(HBM)	V
Junction Temperature	Tj	120	℃
LED Thermal resistance	Rth s-j	13	℃/W

Typical Electro-Optical characteristics curves:

LED Reliability Test List

Test Item	Test Conditions	Standard	Qty(Pcs)	Ac/Re
Life Test	25℃,1000Hrs@60mA	/	20	0/1
High Temperature	85℃,1000Hrs@60mA	/	20	0/1
Low Temperature	-40℃,1000Hrs@60mA	/	20	0/1
High Humidity Heat	85℃,85%RH, 1000Hrs@60mA	/	20	0/1
Low Temperature Storage	-40℃,1000Hrs	JEITA ED-4701 200 202	20	0/1
High Temperature Storage	100℃,1000Hrs	JEITA ED-4701 200 201	20	0/1
Temperature Cycle	(-40'C 30mins --25'C(5mins)--100'C(30mins) ,Temp changing rate:3+/-0.6'C/min)	JEITA ED-4701 100 105	20	0/1
Thermal Shock	-40'C(15mins) --100'C(15mins),changing time <5mins ,300C	MIL-STD-202G	20	0/1
Pulse Life Test	Tp=1ms,DC=0.1,D=Tp/T @ 3×150mA	/	20	0/1
ESD Test(HBM)	2000V,200V/Step, Forward & Reverse Test both 3times	AEC (Q101-001)	20	0/1
Soldering Resistance	260±5℃,10S,3times Pre-treatment 30℃,70%RH	JEITA ED-4701 300 302	20	0/1
Reflow IV Decay	260±5℃,10S,1time Pre-treatment 30℃,70%RH,168Hrs	/	20	0/1

Packaging:

Cautions:

The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the

Top of package. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions Should be taken to avoid the strong pressure on the encapsulated part. So when use the picking up nozzle,The pressure on the silicone resin should be proper.

Soldering iron :
When hand soldering, the temperature of the iron must less than 300℃ for 3 seconds
The hand solder should be done only one times

SMT Reflow Soldering Instructions SMT :
Reflow soldering should not be done more than two times
When soldering , do not put stress on the LEDs during heating
The recommended reflow soldering profile as following

Handling Precautions :
Handle the component along the side surface by using forceps or appropriate tools
Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry
Do not stack together assembled PCBs containing LEDs. Impact may scratch the silicone lens or damage the internal circuitry

Product features:

Adopt good quality chip and frame ,antistatic good stability Ultra low attenuation

High brightness ,low attenuation high color rendering

Minimum 70,80,90 95 CRI options

Strong welding and good stability undead light

Product series and company logo on the front

CE ROHS LM80 Certification

Production Process:

Product Tags:


*From:	Your email address is incorrect!
*To:	Phoenix (suzhou) electronic Co.,ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	4014 LED Chip
Brand Name:	PHOENIX
Model Number:	4014
Certification:	LM80 CE ROHS
Place of Origin:	SUZHOU
MOQ:	4000PCS
Price:	Negotiation
Payment Terms:	Western Union, MoneyGram, T/T
Supply Ability:	100KK PER MONTH
Delivery Time:	7-10 DAYS
Packaging Details:	4000PCS /ROLL
Name:	SMD LED 4014
nput Voltage(V):	3V
Application:	computer light
Power:	60MA
Luminous Flux(lm):	24-30lm
CCT:	2700K 3000K 4000K 6500k
Warranty(Year):	2 years
Working Time (hours):	20000
Operating Temperature(℃):	-40-85
Viewing Angle(°)::	120