Product Details
Company Profile

Overhead Alloy Bare Aluminum Conductor Wire AAAC 120mm2 2.8mm DIN48201

Overhead Bare Conductor Wire AAAC 120mm2 19/2.8mm All Aluminum Alloy Conductor DIN48201/IEC61089

APPLICATION: AAAC is mainly used as bare overhead transmission cable and as primary and secondary distribution cable. It is also suitable for laying across basins, rivers and valleys where special geographical teatures exist.

STANDARD

Basic design to BS 3242 / BS EN 50182 / IEC 61089 / ASTM B 399/B 399M / DIN 48201 -6 standards.

CONSTRUCTION of Overhead Alloy Bare Aluminum Conductor Wire AAAC 120mm2 2.8mm DIN48201

AAAC cable bvconsists of aluminum alloy wires. The aluminum alloy wires are concentrically stranded.

This section deals with heat-treatable magnesium silicon type aluminium alloys to the applicable International Standard, the electrical and mechanical properties of which all fall within the values suggested by relevant standard. Conductors to all other recognized specifications can also be supplied. The alloys referred to have higher strength but lower conductivity than pure aluminium. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the later, their use becomes particularly favourable when ice and wind loadings are low.

(*) Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.

ELECTRICAL PROPERTIES

density@20ºC	2.70 kg/dm
Temperature Coefficient@20°C	0.00360 (°C)
resistivity@20°C	0.0326 Ohms mm2/m
linear Expansivity	23 x10-6 (°C)

SERVICE CONDITIONS

Ambient Temperature	-5°C - 50°C
Wind Pressure	80 – 130kg/m
Seismic Acceleration	0.12 - 0.05g
Isokeraunic level	10 – 18
relative Humidity	5 – 100%

Overhead Bare Conductor Wire(Nominal Area:18.4~1439mm2), AAAC Conductor according to IEC 61089 CONSTRUCTION PARAMETERS

• IEC 60189

Code Number	No. of Wires	A2 Conductors					Max. DC Resistance of Conductor at 20°C
Code Number	No. of Wires	Calculated Area	Diameter of Wires	Diameter of Conductor	Approx. Weight	Rated Strength	Max. DC Resistance of Conductor at 20°C
mm²	-	mm²	mm	mm	kg/km	daN	Ω/km
16	7	18.4	1.83	5.49	50.4	5.43	1.7896
25	7	28.8	2.29	6.87	78.7	8.49	1.1453
40	7	46	2.89	8.67	125.9	13.58	0.7158
63	7	72.5	3.63	10.8	198.3	21.39	0.4545
100	19	115	2.78	13.9	316.3	33.95	0.2877
125	19	144	3.1	15.5	395.4	42.44	0.2302
160	19	184	3.51	17.55	506.1	54.32	0.1798
200	19	230	3.93	19.65	623.7	67.91	0.1439
250	19	288	4.39	21.95	790.8	84.68	0.1151
315	37	363	3.53	24.71	998.9	106.95	0.0916
400	37	460	3.98	27.86	1268.4	135.81	0.0721
450	37	518	4.22	29.54	1426.9	152.79	0.0641
500	37	575	4.45	31.15	1585.5	169.76	0.0577
560	61	645	3.67	33.03	1778.4	190.14	0.0516
630	61	725	3.89	35.01	2000.7	213.9	0.0458
710	61	817	4.13	37.17	2254.8	241.07	0.0407
800	61	921	4.38	39.42	2540.6	271.62	0.0361
900	91	1036	3.81	41.91	2861.1	305.58	0.0321
1000	91	1151	4.01	44.11	3179	339.53	0.0289
1120	91	1289	4.25	46.75	3560.5	380.27	0 0258

AAAC conductor-DIN 48201 Part 6
Nominal Area		Stranding	Overall Diameter	Weight	Rated Strength	Electrical Resistance	Current Rating*
Nominal	Teorical	Stranding	Overall Diameter	Weight	Rated Strength	Electrical Resistance	Current Rating*
mm^2	mm^2	No.xmm	mm	kg/km	KN	Ω/Km	A
16	15.89	7/1.70	5.1	43	4.44	2.0742	78
25	24.25	7/2.10	6.3	66	6.77	1.3593	102
35	34.36	7/2.50	7.5	94	9.6	0.9591	126
50	49.48	7/3.00	9	135	13.82	0.666	158
50	48.35	19/1.80	9	133	13.5	0.6849	156
70	65.81	19/2.10	10.5	181	18.38	0.5032	189
95	93.27	19/2.50	12.5	256	26.05	0.3551	234
120	116.99	19/2.80	14	322	32.68	0.2831	269
150	147.11	37/2.25	15.8	406	41.09	0.2256	309
185	181.62	37/2.50	17.5	500	50.73	0.1828	352
240	242.54	61/2.25	20.3	670	67.74	0.1371	420
300	299.43	61/2.50	22.5	827	83.63	0.111	477
400	400.14	61/2.89	26	1104	111.76	0.0831	568
500	499.83	61/3.23	29.1	1379	139.6	0.0665	649
625*	626.2	91/2.96	32.6	1732	174.9	0.0531	742
800*	802.09	91/3.35	36.9	2218	224.02	0.0415	857
1000*	999.71	91/3.74	41.1	2767	279.22	0.0333	971

Overhead Alloy Bare Aluminum Conductor Wire AAAC 120mm2 2.8mm DIN48201 images

Why you choose us?

OEM/ODM services provided;
Products comply with GB, IEC, BS, ASTM, DIN, VDE and JIS standards; Customer standard requirments Accepted;
Certified to ISO 9001:2015, ISO 14001:2015 and OHSAS 18001:2007;
Registered capital of $30 million and factory covers an area of 60,000㎡;
Advanced test equipment and procedures, 100% inspection before factory;
Enough stocks and the higest efficient shipping time guarranteed;
Professional pre-sales and after-sales services provided.

Product Tags:


*From:	Your email address is incorrect!
*To:	Zhenglan Cable Technology Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Bare Aluminum Conductor
Brand Name:	Zhenglan Cable
Model Number:	Overhead Alloy Bare Aluminum Conductor Wire AAAC 120mm2 2.8mm DIN48201
Certification:	3C; ISO 9001:2015, ISO 14001:2005, OHSAS 18001:2007
Place of Origin:	Henan, China
MOQ:	3000meters
Price:	0.1-90USD/m
Payment Terms:	L/C, T/T, Western Union
Supply Ability:	15-30ton/day
Delivery Time:	15 days
Packaging Details:	Wooden drum, wood and steel drum,as customer's request
Material:	aluminum alloy
Standard:	ASTM B399/B399M, ASTMB398/398M, IEC61089
Country of oringinal:	China
Test:	100%
characted:	Bare Conductor
Nearest port:	Qingdao port