5005 5182 5083 5754 H32 5052 Aluminum Coil Sheet 0.2mm 1mm 2mm 4mm 5000 Series

Product Description

Aluminium / Aluminum 5052 alloy is a non-heat treatable alloy with good corrosion resistance, especially to salt water.
The following datasheet will provide more details about Aluminium / Aluminum 5052 alloy.
Machinability:
The machinability of Aluminium / Aluminum 5052 alloy is rated as fair. This alloy can be easily machined in hard temper
than in annealed form, and the quality of finish is better. Other than in very light cuts, all other machining should be done
using oil lubricants.
Forming:
Aluminium / Aluminum 5052 alloy can be easily formed at room temperature. However, consecutive cold working tends to
reduce the alloy's formability
Welding:
Welding can be easily performed on Aluminium / Aluminum 5052 alloy using conventional methods. In case a filler rod is
needed, it should be Aluminium / Aluminum 5356 alloy as filler. The most suitable welding methods are tungsten or
consumable electrode inert gas shielded arc welding.
Forging:
Aluminium / Aluminum 5052 alloy can be forged from 510°C (950°F) down to 260°C (500°F).
Hot Working:
Aluminium / Aluminum 5052 alloy can be hot worked easily from 510°C (950°F) down to 260°C (500°F).
Cold Working:
Aluminium / Aluminum 5052 alloy is easy to cold work. It can be formed by spinning and drawing. Depending on
the extent of spinning, annealing may be required intermediately.
Annealing:
Aluminium / Aluminum 5052 alloy can be annealed at 343°C (650°F) and then air cooled.
Hardening:
Aluminium / Aluminum 5052 alloy can be hardened by cold working only.

Package

Application

Company Introduction

FAQ:
Q1: What's your terms of payment?
A: 30%T/T as the upfront deposit, 70% before delivery, We will show you the photos and package before you pay the balance.
Q2: What's the terms of delivery?
A: EXW, FOB, CFR, CIF
Q3: What's your delivery time?
A: For stocks, we could transport the goods to loading port within 15 work days after we received the deposit.For productionperiod, it usually takes about 15 days to 30 days after we received the deposit.
Q4: Could you produce according to the samples?
A: Yes, we can customer-made by your samples or technique drawings.
Q5: Could youprovide the compliment samples?
A: Yes, we could provide the free samples on condition that it is available in stocks, however,the transportation fee is borne by buyer.