FuLund Silicone Products Making Machine Hot Electric Vulcanizing For Phone Case

CE passed FuLund Manufacture Hot Electric Rubber Vulcanizing Press Silicone Phone Case Machine

The storage environment of the vulcanizer should be kept dry and well-ventilated to avoid the electrical circuit being wet due to moisture; do not use the vulcanizer outdoors in rainy days to prevent the electric control box and heating plate from entering water; When the machine is used, it should be elevated with items on the ground, and the vulcanizer should not be in direct contact with water.
If water enters the heating plate due to improper operation during use, please contact the manufacturer for maintenance first. If emergency repair is required, open the cover on the heating plate, pour out the water first, then set the electric control box to manual operation, heat it to 100°C, keep the constant temperature for half an hour, dry the circuit, and then put it in Belt gluing is performed manually. At the same time, the manufacturer should be contacted in time for the overall replacement of the line. If you encounter something that you can't solve during use, you must remember to contact the manufacturer in time, and don't repair it at will without knowing the equipment.

Introduction to the structure of the vulcanizer:

1. Structural stability: a special four-column structure is adopted, the upper seat is reinforced with medium carbon steel, and the upright column is thickened and hardened to ensure structural stability and accuracy.

2. System: The high plane pressure equalization correction is adopted, and the pressure (18mpa) strengthens the nut leveling device, which can increase the parallelism of the upper and lower heating plates to 0.05mm.

3. Temperature control system: Adjustable from room temperature to 350°C, using intelligent temperature control to control the temperature fluctuation range within ±2°C.

4. Operating system: PLC combined with touch screen, whether debugging or production, can be controlled directly and simply.

5. Operating system: The optimally designed oil circuit and high-quality oil circuit accessories ensure the smooth operation of the entire oil circuit system from the principle and accessories.

6. Energy-saving system: The heating plate adopts the deep hole processing technology, which is closely matched with the heating pipe to reduce the heat loss during the heat transfer process.

7. The intelligent system can automatically push out the mold, thereby reducing the labor time of the staff, increasing efficiency, high output and saving time.

Scope of application:

Children's toys, baby products, kitchen supplies, clothing labels, equipment seals, etc.