XDL1-20 XDZ1-20 Industrial Electromagnetic Spring Applied Brake Disc Loaded

XDL Series Spring-applied Industrial Electromagnetic Brake Electromagnetic Clutch

Products Introduction

Changzhou Tianniu Transmission can provide with more than 1000 kinds of clutches and brakes can be provided for customers to choose. The torque range of the products is 0.1 nm ~ 2000 nm. In addition, it also provides the service of customized products for customers. In addition to the specifications of its own standard products, it also provides competitive prices. In terms of equipment and materials, the product uses the material with the best permeability to make the high friction coefficient and the high-grade non stone sponge with bottom friction consumption, so as to improve the response time and service life of the product. In terms of performance, it is mainly prominent: high-speed response, high durability, easy assembly and maintenance, no wear adjustment, reliable action, and torque adjustment.

Dlm10 series (eke Series) electromagnetic clutch is used in mechanical transmission system with the help of electromagnetic force

The operation combines or separates the driving side part and the driven side part of the rotary movement, so as to realize power and transportation

Actuator for dynamic transmission. The standard operating voltage of the clutch is 24 volts DC. In general, only

A simple circuit composed of switches, buttons, contactors, travel switches and other ordinary electrical components can be used

It is convenient to realize automatic and remote control, so as to meet the speed change, commutation and positioning of mechanical transmission system

And other requirements.

The clutch is divided into dry and wet working series.

Dlm10 - □ is a wet working series, dlm10 - □ G is dry working series. Separation of wet work

The combiner must be used in occasions with oil lubrication and cooling; The dry working clutch is used in the situation without lubrication, and

Grease and other substances shall be prevented from contaminating the surface of the friction plate.

This series of clutches is a structural form in which the magnetic flux does not pass through the friction plate group. The residual torque after power failure is small and dynamic

Fast operation time, especially suitable for occasions requiring action time. In use, the friction plate is worn

To a certain extent, when the torque drops, it is necessary to adjust the value specified in Table 2 of the working air gap modulation. The adjustment method is

Detailed description in this manual.

Products Parameters

Conditions:

1.The elevation atitude of the clucth installation place doesn't exceed 2000nm.

2.Ambient envirmental temperature is between -5 °C to +40°C.

3.Around the medium,there is no gas and conductive dust that has nonbursting

danger ans can't corrode metal and damage the insulator.

4.The voltage fluctuation of the clutch coil can't exceed -5 present to -15 present of the rated vlotage.

5.the friction lining should be cleaned and no dust.

Changzhou Tianniu Transmission Equipment Co., Ltd is a professional one way clutch bearing supplier, the primary products are micro electromagnetic clutch, torque limiter coupling, sliding shaft coupling, flexible propeller shaft coupling, locking assembly and shaft couplings, etc.

We have been in shaft coulpling and clutch one way bearing industry for more than 10 years, persisting in the business principle of products tailored to requirements from clients. We service through listening to our customers, applying innovation and building with craftsmanship to meet all their needs.

Our Products

Full range of shaft coupling products supply

We have been in Sprag Clutch Bearing and clutch one way bearing industry for more than 10 years, persisting in the business principle of products tailored to requirements from clients. We service through listening to our customers, applying innovation and building with craftsmanship to meet all their needs.

With a wide range, good quality, reasonable prices, stylish design and accepting OEM, our products are extensively used in mining machine equipment, convey equipment, reducer and many other industries.With well equipped testing facilities and strict quality control, Changzhou TIANNIU Transmission Equipment Co., Ltd's products sell well all over the world, the main markets are European, America, Canada, Brazil, India, Asia, etc . It was a certified enterprise with Quality Management System ISO9001:2015, SGS , Safety Certificate of Approval for Mining Products.

Exhibitions

Open to customers from all over the world

We welcome clients from all over the world to seek help from us and we look forward to becoming your long-term and stable shaft coupling manufacturer in China.