Triple Convoluted 10''×3 Air Spring Bellows Front Rear With 2 Girdle Hoop

Triple Convoluted 10''×3 Air Spring Rubber Bellows With 2 Girdle hoop

Specifications and Tecnical Data: 10×3 air bellow

Cross Reference

Bellow number: 10×3

Air spring assembly number cross Reference

FIRESTONE Part Number: W01R584059; W01 R58 4059; W01-R58-4059; WO1-R58-4059; WO1 R58 4059;WO1R584059

DUNLOP SPRINGRIDE SP1539(10×3)

CONTITECH: FT 210-32 DS; FT 210-32 ; FT 210 32; FT210-32; FT 210 32; FT21032

NORGREN: M/31103; M 31103; M31103

PARKER Part Number 9109031

Feature

Excellent universal properties
Very high dynamic capability
Elasticity
Tensile strength
Tear resistance
Abrasion resistance

Applications

Web tensioning device
Short stroke mechanical linkage
Hot foil stamping press
Commercial laundry machine
Quick lock device Roller tensioning
Reel tensioning

Air Bellows are an excellent solution to vibration isolation problems.

The basic points which must be considered when selecting an air bellow as an isolator are:
- load or total weight and number of mounting points
- recommended operating height
- degree of isolation
- operating pressure

Load capability
When selecting the isolator, there should be sufficient load-bearing capability to compensate asymmetric load distribution or excess weight.
Air isolators have been designed to absorb dynamic increases in load from operating vibrations.

Recommended operating height
To ensure optimum isolation and lateral stiffness, isolators should be used at the recommended operating height.

Operating pressure
As a rule, the size of the air isolator is correct if the operating pressure is between 4 and 6 bar.

Knowledge

The thrust of the Air Bellows depends on the height of the bellow.
When height increases the thrust decreases because of the change in the effective area.
DO NOT INFLATE the Air Bellow until it is not fixed on the machines with end stops. And so DEFLATE fully the Air Bellows before removing from the machine.
Take care to put enough clearance around the Air Bellow because of the change in the section under pressure.
Use the full surface of the end plates to bear the forces.
Use guidance to avoid any angular or axial misalignments.

The image of 10×3 air spring bellows

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.