Glossy / Matte Twill Carbon Fiber Panels 400 X 500mm For Building

Premium Quality Real Carbon Fiber Sheets & Carbon Fiber Panels

Carbon Fiber Sheet Plates

LIJIN carbon fiber is a professional manufacturer of Rigid Carbon Fibre sheets with more than 10 years of experience. All our carbon fiber laminate sheets are made from high-quality Toray T300 3K & Tairyfil TC35 unidirectional carbon fiber prepreg fabric. We can offer you various carbon fiber composite panels for different applications. We can produce custom-made carbon fiber panels as large as 118" x 315" and thicknesses up to 2 1/2 inches!

LIJIN carbon fiber

produces various carbon fiber sheets, all these sheets can be divided into 3K plain/twill weave, unidirectional type, forged surface, or color carbon fiber plates. The high gloss finish carbon fiber sheets' mirror-like, Matte finish is also perfect performance. The thinnest carbon fiber veneer we can do is 0.2mm which is flexible and perfect for decoration or gasket. All these lightweight & high-strength CF sheets can be cut to the size you need.

What are carbon fiber sheets used for?

• The carbon fiber sheets can be used in a wide range of applications because of their lightweight and high-strength characteristics.
• The 1.5mm 2mm,3mm, and 4mm carbon fiber plates are usually used as carbon fiber drone frames and arms or racing car bottom plates.
• Meanwhile, the 2mm 2.5mm 3mm carbon plates also can be cut to carbon fiber rear derailleur.
• The thin carbon fiber veneer 0.2mm 0.3mm 0.5mm are mostly used for decorating.
• 5mm 8mm 10mm and thicker carbon plates can be cut to size for high strength and lightweight customized carbon fiber parts.

Our products:

1. Surface: Glossy/ Matte
2. Material: Carbon Fiber&Epoxy Resin
3. Shape: Carbon Fiber Sheet
4. Color: Black
5. Density: 1.5 g/cm3
6. Tolerance: +/-0.05mm
7. Used: Building,Industry,Diving,Aerospace,Outdoor sports,etc

Key features of carbon fiber:

• High strength/Excellent structural properties
• Good tensile strength & modulus/Superior dimensional stability
• Anti-corrosion / Acid and alkali resistant
• Low Density/Light in weight
• Good X-ray transparency
• Highly UV-resistant/Eco friendly

Carbon Fiber Flat Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.
 

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.