Product Details
Company Profile

Lvds 30 Pins Industrial LCD Display 1280x1024 19 Inch LCD Display All Viewing Angle

19 Inch Lcd Display 1280x1024 Lvds Interface 30 Pins DV190E0M-N11 All Viewing Angle

General Description:

DV190E0M-N11 is a 19.0" LCD module product with a-Si TFT-LCD technology, it is assembled with WLED backlight, no backlight driver, no touch. typical features as: landscape mode / portrait mode, white LED backlight, positive terminal mount, and matte surface.

Features:

1.LVDS interface with 2 pixel / clock

2.High-speed response

3.Low color shift image quality

4.6-bit (Hi-FRC) color depth, display 16.7M colors

5.Wide viewing angle

6.DE (Data Enable) only mode

7.HADS technology is applied for high display quality

8.RoHS compliant

Specifications:

Parameter	Specification	Unit	Remarks
Active area	374.784(H) × 299.8272 (V)	mm
Number of pixels	1280(H) × 1024(V)	pixels
Pixel pitch	97.6(H) ×292.8(V)	um
Pixel arrangement	Pixels RGB Vertical stripe
Display colors	16.7M	colors	6bits+FRC
Display mode	Normally Black
Dimensional outline	396.0(H) × 324.0(V)×9.9(D)	mm	Detail refer to drawing
Weight	1520	g	19.82kg/box
Power Consumption	10.64 Typ. 14.216 Max.	Watt	BLU Consumption 8.64 Typ. 9.216 Max.
Bezel width (L/R/U/D)	8.6/8.6/ 10.5/ 10.5	mm
Surface Treatment	Haze 25%, 3H
Back-light	Down edge side, 1- LED Light bar
Possible display type	Landscape and Portrait Enabled

Absolute Maximum Ratings:

Parameter	Symbol	Min.	Max.	Unit	Remark
Power Supply Voltage	VDD	-0.3	6.0	V	Ta = 25 ℃
Logic Supply Voltage	VIN	VSS-0.3	VDD+0.3	V	Ta = 25 ℃
Operating Temperature	TOP	0	+50	℃
Storage Temperature	TSUR	-20	+60	℃
Storage Temperature	TST	-20	+60	℃
Operating Ambient Humidity	Hop	10	80	%RH
Storage Humidity	Hst	10	80	%RH

Electrical Specifications:

Parameter		Symbol	Values			Unit	Remark
Parameter		Symbol	Min	Typ	Max	Unit	Remark
Power Supply Input Voltage		VDD	4.5	5.0	5.5	Vdc
Power Supply Ripple Voltage		VRP	-	-	200	mV
Power Supply Current		IDD	-	400	1000	mA	Note 1
Power Consumption		PDD	-	2	5	Watt	Note 1
Rush current		IRUSH	-		3.0	A	Note 2
LVDS Interface	Differential Input High Thr eshold Voltage	VLVTH	+ 100	-	+300	mV
	Differential Input Low Threshold Voltage	VLVTL	-300	-	- 100	mV
	Input Differential Voltage	\| VID \|	200	-	600	mV
	Differential input common mode voltage	VCM	1.0	1.2	1.5	V

Note 1:The supply voltage is measured and specified at the interface connector of LCM.

The current draw and power consumption specified is for VDD=5.0V,Frame rate fV=60Hz and Clock frequency=54MHz.

Note 2:The duration of rush current is about 2ms and rising time of Power Input is 1ms(min).

Parameter			Min.	Typ.	Max.	Unit	Remarks
LED Light Bar Input Voltage Per Input Pin		VPIN	32.4	36	38.4	V	Duty 100%
LED Light Bar Input Current Per Input Pin		IPIN	-	120	-	mA	-
Total Current				240		mA
Total Voltage			32.4	36	38.4	V
LED Power Consumption		PBL		8.64	9.22	W
LED Life-Time		N/A	30000	-	-	Hour	IF = 120mA
PWM Control Level	PWM High Level		-	-	-	V
PWM Control Level	PWM Low Level		-	-	-	V
PWM Control Frequency		FPWM	-	-	-	Hz
Duty Ratio		-	-	-	-	%

Interface Connection:

LVDS Connector : IS100-L30O-C23(UJU)

Pin No	Symbol	Description	Pin No	Symbol	Description
1	RXO0-	Negative Transmission data of Pixel 0 (ODD)	16	RXE1+	Positive Transmission data of Pixel 1 (EVEN)
2	RXO0+	Positive Transmission data of Pixel 0 (ODD)	17	GNG	Power Ground
3	RXO1-	Negative Transmission data of Pixel 1 (ODD)	18	RXE2-	Negative Transmission data of Pixel 2 (EVEN)
4	RXO1+	Positive Transmission data of Pixel 1 (ODD)	19	RXE2+	Positive Transmission data of Pixel 2 (EVEN)
5	RXO2-	Negative Transmission data of Pixel 2 (ODD)	20	RXEC-	Negative Transmission Clock (EVEN)
6	RXO2+	Positive Transmission data of Pixel 2 (ODD)	21	RXEC+	Positive Transmission Clock (EVEN)
7	GND	Power Ground	22	RXE3-	Negative Transmission data of Pixel 3 (EVEN)
8	RXOC-	Negative Transmission Clock (ODD)	23	RXE3+	Positive Transmission data of Pixel 3 (EVEN)
9	RXOC+	Positive Transmission Clock (ODD)	24	GND	Power Ground
10	RXO3-	Negative Transmission data of Pixel 3 (ODD)	25	NC	No. Connection
11	RXO3+	Positive Transmission data of Pixel 3 (ODD)	26	NC	No. Connection
12	RXE0-	Negative Transmission data of Pixel 0 (EVEN)	27	NC	No. Connection
13	RXE0+	Positive Transmission data of Pixel 0 (EVEN)	28	VDD	Power Supply: +5V
14	GND	Power Ground	29	VDD
15	RXE1-	Negative Transmission data of Pixel 1 (EVEN)	30	VDD

Handling Precautions:

1.Do not connector or disconnect the cable to/from the Module at the “Power On” Condition.

2.When the module is operating, do not lose CLK, ENAB signals. If any one of these signals i s lost, the module would be damaged.

3.The electrochemical reaction caused by DC voltage will lead to LCD module degradation, so DC drive should be avoided.

Product Tags:


*From:	Your email address is incorrect!
*To:	Shenzhen FRIDA LCD Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	Industrial LCD Display
Brand Name:	BOE
Model Number:	DV190E0M-N11
Certification:	RoHS
Place of Origin:	China
MOQ:	12pcs
Price:	USD79
Payment Terms:	T/T
Supply Ability:	2000pcs
Delivery Time:	1 work days
Packaging Details:	12pcs/box original package
Outline Dimension:	396.0(H) ×324.0(V)×9.9(D) mm
Active Area:	374.784(H) × 299.8272 (V) mm
Number of pixel:	1280(H)×1024(V)
Luminance:	250cd/㎡
Operating TEMP:	0℃~+50℃
Storage TEMP:	-20℃~+60℃