• Constructed from stainless steel 304 material for maximum endurance to outdoor elements.

• 304 Stainless Steel J-Hook easily attaches to the solar panel frames.

• 304 Stainless Steel Washers will firmly hold wire mesh screen to the module assembly preventing squirrels and rodents from damaging the interconnection wires and birds from building nests under the solar panel.

• The Stainless Steel J-Hook can easily be trimmed or bent after assembly.

• Stainless Steel Washers are offered in both natural and black
painted versions. These are the black painted washers.

1) Features and benefits

>Clips will not scratch, pierce or impact integrity of solar panels.
>Clips are used to secure the mesh to solar panels which creates a physical barrier to keep birds from accessing and nesting in the area beneath the solar arrays

2) Calculating the number of clips needed

> The QTY needed for one solar panel: A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 fastener clips on each long edge and 2 on each short edge.

> The QTY needed for one roll: usually the length of solar panel roll is 30m, each roll is allocated with 60 fastener clips.

> The QTY needed for a standard 3kW system (2 rows of 6 panels each - 12 panels total installed in a portrait orientation) : 35 J hooks fasteners with self locking washers.

J hook standard package

1. 100 pcs per pp bag, 80 bags per carton

2. 500pcs per pp bag, 16bags per carton

3.1000pcs per pp bag, 8 bags per carton

self locking washer

1. 100 pcs per pp bag, 60 bags per carton

2. 500pcs per pp bag, 12bags per carton

3.1000pcs per pp bag, 6 bags per carton