Iron Double Convoluted Air Spring Actuator Airkraft 113053/2B-181 G3/4 Rubber Bellows For Vibration

Iron Double Convoluted Air Spring Actuator Airkraft 113053/2B-181 Replacement With G3/4 Rubber Bellows For Vibration

Refer No.

Contitech FD120-17

Contitech FD12017

Contitech FD120 17

Contitech FD 120-17

Contitech FD 120 17

Contitech FD 12017

Specifications and Detailed Technical Parameters: 2B12017-34

• Nut/blind nut

Top plate screw (nut) teeth: 2×M8×1.25

The screw center distance on the top plate: 70mm

Screw (nut) teeth of the bottom cover plate: 2×M8×1.25

The screw center distance on the bottom plate: 70mm

• Air hole/air inlet/air fittings

Air hole/air inlet/air fittings: G3/4

Air hole location: middle

• Cover plate

The Diameter Of The Top Plate: 135 mm

The Diameter Of The Bottom Cover: 135mm

• Bell rubber bellows

MAX. Rubber Bellow Diameter: 215mm

Height: 167mm

Working stroke: 75-230mm

• Bumper block/bumper block

Without bumper block

• Belt loop/Belt loop/Girdle hoop

With one piece of belt loop/girdle hoop

Min. pressure: 0 bar

Return force to min.height: ≤200N

Overall weight with clamped plates: 2.3kg

Vibration isolation - dynamic characteristic values

Design Height H: recommended 190mm, minimum 175mm

Pneumatic application-static characteristic values

Force F[KN]

Other Types Airkraft Replacement We Could Offer

Reasons for the application of rubber air springs in vibration equipment

1. Reduce the operating frequency. The greater the stiffness of the rubber air spring material, the greater the stiffness of the air spring, and the higher the first-order resonance frequency, which increases the minimum operating frequency of the system. Therefore, the rubber safety air spring vibration isolation system should reduce the material stiffness and natural frequency, so that the bearing capacity of the air spring vibration isolator can be retained enough, and the minimum operating frequency of the system should be as low as possible. ​

2. The comprehensive isolation effect is strong. When the vibrating table vibrates laterally, the rigidity of the rubber material of the reed capsule is much larger, the rubber air spring body has a soft structure, and has a comprehensive vibration isolation effect of axial, lateral and rotational steering, and a throttling is set between the air spring and the additional air chamber. valve hole. When air flows through the throttle hole, part of the vibration energy is absorbed due to resistance, which acts as damping and damping.

The related picture of 2B12017-34

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.