Low Smoke Glassfiber Filled Nylon 66 Colorable Polyamide Fiberglass High Rigidity Polyamide Granules

Low Smoke Glassfiber Filled Nylon 66 Colorable Polyamide Fiberglass High Rigidity

1. PA66 can maintain high strength and rigidity even at higher temperatures.
2. The viscosity is low and the flowability is good.

3. The material has excellent coloring ability, can achieve various requirements of color matching.
4. Viscosity is very sensitive to temperature change. The Shrinkage rate of PA66 is between 1% and 2%. The addition of glass fiber additives can reduce the shrinkage rate to 0.4%~0.8%.
5. PA66 has many resistance to soluble solvents, but weak resistance to chlorinated acids and other agents.
6. It has excellent abrasion resistance, self-lubricating property and high strength. However, it absorbs water and thus poor dimensional stability.

7. PA66 has excellent flame retardant properties, and can achieve different degrees of flame retardant effect by adding different flame retardants.

Nylon/PA66 granules reinforced by fiberglass. Granulation capacity of 8,000 tons per year. The performance of final products of this raw material were in line with the national standard.

We have been making research and development for special material of PA66GF25 thermal break strip since 2006, we have a deep understanding and rich experience of the relevant industry. We can provide our clients with special material of PA66GF25 thermal break strips of all levels. During these years, we also established a good partnership with many companies is the upstream and downstream industry.

In 2016, we together with factory of mold, extruder and factory of thermal break strips established Zhangjiagang Bangyu Engineering Plastics Co.,Ltd, which is responsible for international import and export business. In 2021, Zhangjiagang Bangyu Engineering Plastics Co.,Ltd was changed ans registered as Suzhou Polywell Engineering Plastics Co.,Ltd. 
The reason why we joined Polywell together with the other two companies is that in this field, the requirements for professionalism are very high. In this field, the company that produce raw materials usually do not research machines and molds, but clients usually need all of them. We found this point, so we joined two other companies established Polywell company together. Polywell can provide a whole set of solution about thermal break strips, including raw material –PA66GF25 granules, extruders, molds, and technical support. This is our biggest advantage.

Strive for customers’ satisfaction and success, service to customers is the principle we’ve always been insisting in the last ten years, to provide our customers with high-quality products and service.

Our domestic sales volume is very stable. We are the main supplier of two listed companies which produce aluminum profile at home, and will obtain the long-term cooperation with them. Otherwise, we also have the long-term cooperation with many small manufactures.

If customers have the need of purchasing other products, we can also provide procurement service.