Black Case 8 Port Managed POE Af/At/Bt Industrial Ethernet Switch With 2 Combo Ports

8 port PoE++ POH layer 2 managed outdoor Ethernet Switch

Key Features of managed Ethernet switch

• 8 x 10/100/1000Mbps auto-sensing RJ45 ports, 2 x 1000Mbps COMBO ports
• 2 x 100/1000/2500Mbps SFP fiber ports, 1 x CONSOLE port for management
• IEEE 802.3af/at/bt (15.4W/30W/60W/90W) power on to 1 ~ 8 RJ45 ports, 720W budget
• Support POE managed, enable/disable the POE ports, set the POE power-on delay and POE output power
• Real-time display of voltage, current, power and PD level
• Support relay alarm output and alarm status light display(2 way-from dry contact)
• 4KV Ethernet surge protection, adapt to a harsh outdoor environment
• Support Auto MDI/MDIX
• Flow control mode: full duplex with IEEE 802.3x standard half-duplex with Back pressure standard
• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
• A store-and-forward switching mechanism

Management Software Features

1. Support cable diagnosis and can locate the fault point
2. Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
3. Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
4. Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression, differentiated services
5. Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
6. Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
7. Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
8. Support IGMP agent report, MLD snooping
9. Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
10. Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
11. Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
12. Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
13. Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
14. Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.

Specification of Industrial POE managed switch

Application of 8 port POE switch

QC Profile

• ISO9001 Quality System
• We got necessary certificates to support our products.
• Full-Spectrum environment and electrical testing of all product design

Production steps

1. Welding: Weld the necessary components
2. 2. Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
3. 3. Assembling: Builds up components of a product, like panels, screws, PCB boards.
4. 4. Testing: To make sure the product is basically working fine after assembling
5. 5. Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
6. 6 Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
7. 7. QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
8. When all above is done, the product will go to market.

More Product Photos