Grooving Cnc Carbide Inserts Mgmn 300 200 400 500 150 600 250 Slot Groove Cutting CVD

Quick Detail:

• High hardness
• High precision
• wear-resisting
• Good cutting performance
• Fine cutting
• Long service life

Description:

• The mgmn cnc carbide inserts are made of tungsten steel base material with German technology, and its overall hardness is stronger; New nano gradient composite structure coating, with ultra-high nano hardness and good film substrate bonding force; The blade is sharp and wear-resistant, with small resistance, enhanced blade, good stability, smooth chip breaking, high blade accuracy, effectively reducing friction, reducing loss, and longer service life.

Specifications:​

Lead Time:

Notice:

• The cnc carbide inserts shall not be collided or dropped on the ground and must be handled with care.
• Before installing the cnc carbide inserts, the performance and purpose of the saw table must be confirmed to ensure that the cutting direction indicated by the blade arrow is consistent with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction. Wrong installation direction may cause the blade sawtooth to fall off, so as to prevent accidents.
• After installation, it is necessary to confirm whether the central hole of the cnc carbide inserts are firmly fixed on the flange plate of the saw table. If there is a gasket, the gasket must be sleeved; Then, gently push with your hand to confirm whether the blade rotates eccentrically.
• When using, do not exceed the specified high speed
• When the cnc carbide inserts are not used, hang the blade vertically on the dry shelf.

Applications:

Our cnc carbide inserts could to be processed Alloy steel, Tool steel, carbon steel, stainless steel, Cast iron and Titanium alloy. Working material as following:

FAQ