2.5G SFP 1310nm 20km Industrial Transceiver Cisco ONS-SI-2G-I1 Compatible

Cisco ONS-SI-2G-I1 Compatible 2.5G SFP 1310nm 20km Industrial Transceiver

2.5G SFP 1310nm 20km Industrial Transceiver

This Cisco ONS-SI-2G-I1 Compatible 2.5G SFP 1310nm 20km Industrial SFP transceiver provides 2500Base-LX throughput up to 20km over single-mode fiber (SMF) using a wavelength of 1310nm via an LC connector.

Product Features

• Functionally identical to Cisco ONS-SI-2G-I1
• 1310nm DFB laser transmitter and InGaAs PIN receiver
• Single 3.3V power supply
• Support Digital Diagnostic Monitoring Interface
• Low power dissipation
• Metal enclosure provides lower EMI
• ROHS compliant and Lead-Free

General Operating Characteristics

Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 85 ℃,VCC = 3.13 to 3.47 V)

Notes:

1.Measured at 2.5Gb/s with PRBS 2 2^{23 – 1}NRZ test pattern.

2.Unfiltered, measured with a PRBS2^{23 – 1} test pattern @2.5Gbps

3.Measured at 2.5Gb/s with PRBS 2^{23 – 1} NRZ test pattern for BER < 1x10^-12

Product Descriptions

This Cisco ONS-SI-2G-I1 compatible SFP industrial module is suitable for 2.5Gb/s serial optical data communications intermediate-reach application, such as SDH STM-16 S-16.1/SONET OC-48 IR-1/2GFC. It provides a 20km transmission distance over single-mode fiber at a nominal wavelength of 1310nm. It has been programmed and tested to work with a wide range of Cisco industrial switches and routers. It performs identically to Cisco part number ONS-SI-2G-I1, allowing it to be an ideally equivalent to original transceivers.

Applications

● SDH STM-16 and SONET OC-48 system

● 2X Fiber Channel

● Switch to Switch interface

● Switched backplane applications

● Router/Server interface

● Other optical transmission systems

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.