PLYFIT HY973 Interior Grade Waterproof Acrylic Sealant No Pollution Low Odor

PLYFIT HY973 INTERIOR GRADE ACRYLIC SEALANT

Art No. A0301

Not recommand for

1.Masonry or cement, aquariums & metals like zinc, brass, copper, lead metal;

2.Architectural joints, joints subject to heavy abrasion or wear or tuck pointing;

3.Total water immersion, frosty or moist surface;

4.Unsuitable for application when the surface temperature is lower 4℃ (40℉) or over 40℃ (110℉);

5. Joints deeper than 1/2” without use of a backer rod.

Shelf Life: 12 months

Caution:

1. The process of curing will release lower-molecular materials,therefore, the construction workplace shall ensure good ventilation, in order to avoid the highly concentration of volatile cause people discomfort(cured sealant will not affect people’s health);

2. Contain acetoxysilanes and petroleum distillates. Acetic is released during curing and has a vinega-like odor.

3. Harmful if contact with eyes, skin, and respiratory irritation when it’s non-cured.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice;

4. Please store the product out of children' reach,if swallow, please immediately seek medical advise.

Detailing Images





Substrates preparation

A. All surface must be clean and dry, degrease and wash off any contaminates that could impair adhesion.

B.Certain plastic may require specific surface treatment to obtain optimum adhesion. Such as the polypropylene, which should need chemical corrosion or plasma treatments?



How to apply

A. Apply a bead of neutral sealant to one of the prepared surface, and then quickly cover with the other substrate to be bonded.

B. On exposure to moisture, the freshly applied material will “skin over” in about 10 to 15 minutes at room temperature and 50% relative humidity. The surface is easily tooled with a spatula.

Why choose us:

1. Over 13 years manufacturing experience;

2. 11 years golden supplier on .com;

3. Exporting experience in over 80 countries;

4. Quality Guarantee: ISO9001,REACH,TUV, Factory Audit, SASO;

5. On time delivery, professional R&D team & satisfied sales service;

6. Customized product available.

Plyfit Industries China,Inc. was established in October 2003, we are an industrial corporation specialized in developing, manufacturing and marketing chemical products including aerosol car care product and spray paint, etc.

Our factory occupies 44,000 square meters, with advanced equipment and production lines, we are devoting in providing customers with quality products and excellent service.

As early as in 2004, we have passed ISO9001: 2000 international quality management system.our products have all achieved the European & USA standards of quality, environmental protection and security. In addition to the EU REACH certification, our specific products have passed the TUV and CEST test and get the INTERTEK certification for EN71 non-toxic (non heavy metal) test.

While backed up by the modernized advanced production facilities, more importantly, we hold an outstanding RD/production/management & marketing team consisting of skilled workers, experienced engineers and professional managers. With more than 10 years experience in this industry, we are holding mature formula and advanced technology, we can provide comprehensive solution from design, RD ,production to marketing according to customer’s requirement.

So far, we have exported to more than 70 countries and regions in the world, including the United States, Canada, Japan, Russia, Europe (such as Germany, Spain, Britain, Denmark ... ..), South America, Australia, The Middle East, Southeast Asia, Africa,etc.

Today, PLYFIT continuously dedicates effort to technology revolution for better quality ,service and higher customer satisfaction.

Besides traditional business, we are keen to establish long-term cooperation with you on OEM or ODM business.

Profession creates good life!