100% Polyester Blackout Fabric For Manual And Motorized Roller Shades Blinds

100% Polyester Blackout Fabric for Manual and Motorized Roller Shades Blinds

Blackout blinds fabrics are typically used in areas such as laboratories and dark rooms where total light exclusion is required. A standard roller blind with a blackout fabric is often called a ‘blackout blind’ by contractors and facilities managers and whilst the fabric is entirely opaque with no light penetrating through there will always be light leakage around the sides. These blinds are commonly used in schools to provide adequate shading for interactive whiteboards.

Blackout roller blinds offer a lot of benefits in terms of light and noise. These curtains can help in reducing noise, especially if you are living on busy streets. Having these curtains in your home is a worthy investment.

These curtain's blind linings can block all the light but, in some cases, light can still be seen on the edges of the curtain. Usually, the best blackout blinds available contain at least one layer of tightly packed woven fabric that does not allow the penetration of light through the fibers.

Specifications

Why Choose Us?

1. We have the most strict quality control, the fabrics can be 100% used.
2. Better view
a. Flat & neat surface, beautiful color, no defect, the fabric can fall naturally, no curling on the edge even for long length.
b. The polyester yarn is 100% new, and all imported from , which is high strength and low break rate, making sure no defects.
3. Our fabric is healthy and eco-friendly.
4. We have 86 sets of weaving machines (imported), so there is high production efficiency.

Certificates & Tests

1. Color fastness: Grade 8, (ISO105B02)
2. SGS tests
3. Oeko-Tex Standard 100 tests
4. BIOSAN tests
5. REACH certificate

Packing & Delivery

1. Well organized the fabrics;
2. In polybags inside packing;
3. Outside in strong paper tube packing;
4. Package dimensions:

• 2.6m width: 2.75m*0.19m*0.19m
• 3m width: 3.2m*0.2m*0.2m

FAQ

01) What fabrics do you manufacture?
We make :
1.Polyester sunscreen( openness 1%, 3%, 5%, 8%, 10% & 12% etc.)
2.Fiberglass sunscreen(1%, 3% & 5% etc.)
3. Zebra Sunscreen fabric
4. Other customized fabric.

02). How many defects are on 1 roll( 2.5m wide * 40m long) of fabric?
We have the most strict quality control, usually, there are 0 defects in each roll of our regular production series.
For customized series, we will control the defects to be less than 3.

03). If I only get a small quantity needed for the first order, is it ok?
We can start cooperation in a very flexible way, for the first trial order, you can buy only several rolls as long as the item is in
stock. If no stock, the MOQ is 1000m/item & width.

04). If I have my own design, quality & color, can you OEM for me?
Yes, we offer OEM service according to the client's request.

05). Can you send us your sample?
Yes, we offer free A4 size sample

Our Mission: Enjoy the sunshine.

Our Vision: Where there is sunshine, there is Groupeve.

Our Values: Achievement of customers, honesty and trustworthiness; Open innovation and strive for excellence.

Bathing in the sun makes us warm and healthy.

Sitting in a spacious office and feeling the fresh and bright sunlight passing through the glass, we start a busy and fruitful day. No need to worry the heat and sun-damage, because the roller fabric is produced by Groupeve Company, which can not only block the strong light and ultraviolet rays but also can transmit light, ventilate, heat-insulate, save space and clean easily, that’s why we can enjoy the unobstructed view and beautiful sunshine all the way in the office.

After World War II, heating, ventilation, fluorescent lamps, integrated ceilings became popular in buildings, but these facilities affected natural lighting, so glass-walled office buildings appeared in the 1950s. They provided a broad view without obstruction, which promoted the development of landscape offices in the 1960s. In 1958, Mies and Johnson co-designed the 38-story New York Seagram Building with glass curtain walls, ever since then, the glass-walled buildings have been rising up all over the world. Roller Blinds that can increase effective lighting and block ultraviolet rays have become the focus of attention.

Established in 1991, Sunewell is a leading company who manufactures Roller Blinds Accessories and Components. As the business grows and expands, it was acquired by Sichuan Groupeve Co., Ltd in 2002.

After that Groupeve has three own factories, one is to produce components of all blinds(Sunewell®), the other is to assemble finished blinds (Bottontrak®, Sunetrak®), and the third one is to produce roller blinds fabric (Sunetex®, MagicalTex®, Aputex®). It all covers an area of approximately 25,000m². We have over 500 employees and already passed the factory audit from BSCI, ISO9001: 2000 quality standard system.

After 20 years of developing experience, now we manufacture and supply Components & Accessories of Vertical Blinds, Common Roller Blinds, Zebra Blinds, Shangri-La Blinds, Bamboo Blinds, Crank Roller, Spring Roller Blinds, Roman Blinds, Horizontal Venetian Blinds, Pleated Blinds, Panel Blinds, Plated Blinds and Honeycomb Blinds. Such as Aluminum Profile, Blinds Cover, Blinds Tube, Blinds Bottom Rail, Chain, Head Track, Ceiling Clip, Roller Blinds Mechanism, Cord Drive Runner, Cord Weight, Wall Bracket, PVC Double Tape, Slat Weight etc.

Which is equipped with advanced outdoor and indoor button fabric manufacture eauipments. With great attention to scientific management and technical innovation, Groupeve has developed the finished products Buttontrak® Blinds, Sunetrak® Blinds & Zipper Track Blinds which are our patent products for interior and exterior sunshade system solution. And they are primarily exported to Western Europe, Eastern Europe, North America, South America, Southeast Asia and other regions all over the world.

Groupeve lays emphasis on building a team, which combines political integrity with professional competence and advocates mutual trust between enterprise and employees, so as to have an experienced and high-quality manufacture, sales and R&D team. After years of product innovation and market development, Groupeve constantly improves the product quality and corporate image, and always devotes to providing customers with quality products and considerate services.

Also our all custom-made finished blinds are manufactured in our own factory. We're offering a full range of services and products for almost any interior & exterior sunshade related company.