Rubber 1/4NPTF Portsize Single Convoluted Air Spring W01 358 7564 Firestone Air Mount

W01 358 7564 Firestone Air Mount Single Convoluted 1/4NPTF Portsize Rubber Air Spring

Essential Details

Product ID: 1B8×4
Condition: New without Factory Packaging
Brand: Netural or as customers' request
Ships From:
Baiyun District, Guangzhou, China
Ships To: Worldwide
Net Weight: 2kg/pc
Packing Dimensions: 24×24×24cm(3 quantities)

Cross Reference

Air spring supplier: Firestone

Supplier Number: W01-358-7564; W01 358 7564; W013587564; WO1-358-7564; WO1 358 7564; WO13587564; w01-358-7564; w01 358 7564; w013587564

Air spring supplier: Contitech/ Continental

Supplier Number: FS120-10; FS 120-10; FS120 10; FS 120 10; FS12010; FS 120-10 CI 1/4 NPT; FS 120-10 CI 1/4 NPT CA; FS120-10CI1/4NPTCA

Air spring supplier: Goodyear

Supplier Number: 1B8-550;1B8 550;1B8550

The detailed Specifications and techical parameters: 1B8×4

SINGLE CONVOLUTED AIR SPRING
AIR MOUNT
TYPE 1 BEAD PLATE
1/4 INCH NPT CENTERED PORT

The Max. OD: 230mm

Air hole/Air inlet/Air fittings: 1/4NPTF

Working Stroke: maximum 140mm to minimum 50mm

Top/Bottom cover diameter: 135mm

Mounting Screw: 2pcs×3/8-16UNC on each cover

Screw center distance: 35mm

About Guomat Air Spring

Guomat air springs are highly engineered elastomeric bellows with specially designed metal end closures. Our standard two ply air spring bellows is actually made up of four layers:
a. An inner liner of calendered rubber.
b. One ply of fabric reinforced rubber.
c. A second ply of fabric-reinforced rubber (with the cords at a specific bias angle to the first ply).
d. An outer cover of calendered rubber.

AIR INLET
1/4” NPT is standard. 3/4” NPT is also available for most parts.
BLIND NUT
3/8-16 UNC thread x 5/8” deep (two or four per each plate depending on part size). Used for mounting the part.
UPPER BEAD PLATE
Permanently crimped to bellows to form an airtight assembly which allows for leak testing before the unit leaves the factory. Zinc/chromate plated for rust protection.
GIRDLE HOOP
Wire wound type shown, molded into the bellows.
BELLOWS
Wall gauge is approximately 1/4”.
LOWER BEAD PLATE
Usually the same as upper bead plate, except without air inlet.

The reated picture

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.