PVD Magnetron Sputtering Chrome Coating machine On Automotive Aluminum Alloy Wheels

What is magnetron sputtering technology?
Magnetron sputtering is another form of PVD coating technology.

Plasma coating
Magnetron sputtering is a plasma coating process whereby sputtering material is ejected due to bombardment of ions to the target surface. The vacuum chamber of the PVD coating machine is filled with an inert gas, such as argon. By applying a high voltage, a glow discharge is created, resulting in acceleration of ions to the target surface and a plasma coating. The argon-ions will eject sputtering materials from the target surface (sputtering), resulting in a sputtered coating layer on the products in front of the target.

Reactive sputtering
Often an additional gas such as nitrogen or acetylene is used, which will react with the ejected material (reactive sputtering). A wide range of sputtered coatings is achievable with this PVD coating technique. Magnetron sputtering technology is very advantageous for decretive coating (e.g. Ti, Cr, Zr and Carbon Nitrides), because of its smooth nature. The same advantage makes magnetron sputtering widely used for tribological coating in automotive markets (e.g. CrN, Cr2N and various combinations with DLC coating - Diamond Like Carbon coating).

Magnetic fields
Magnetron sputtering is somewhat different from general sputtering technology. The difference is that magnetron sputtering technology uses magnetic fields to keep the plasma in front of the target, intensifying the bombardment of ions. A highly dense plasma is the result of this PVD coating technology.

Magnetron sputtering technology is characterized by:

• A water-cooled target, so little radiation heat is generated
• Almost any metallic target material can be sputtered without decomposition
• Non-conductive materials can be sputtered by using radio frequency (RF)
  or medium frequency (MF) power
• Oxide coatings can be sputtered (reactive sputtering)
• Excellent layer uniformity
• Very smooth sputtered coatings (no droplets)
• Cathodes (of up to 2 meter long) can be put in any position, therefore high
  flexibility of sputtering equipment design
• 
  

Shanghai Royal Technology Inc. was established in 2006, a worldwide supplier of high quality vacuum equipment with key locations around the globe. Research and Development technology are supported by specialized engineers in the United States and China. High-tech machine manufacturing facilities are located in Shanghai and our global network of service centers ensure fast customer service response in key locations.

 Shanghai Royal Technology has a strong drive for innovative design and high quality components selection, combined with an extra careful assembly process and a topnotch team of talented technicians and inventors, which enable us to offer turn-key coating solutions with high standard vacuum equipment, meeting and often exceeding Western standard. We are determined to serve the market worldwide in various industries such as:

Consumer electronics, automotive, renewable energy, architecture, Nano and bio-medical materials.

RTAS model,the arc and sputtering integrated series equipment can produce highly reflective black and bronze films specifically for high quality decorative coatings.

RTSP1200-FCEV, It is a sputtering system with PECVD process to deposit thin film on hydrogen fuel cell power modules. Fuel Cell Vehicles is the newest technology for the next generation of environmentally friendly cars. The main advantage and technological progress compared to commonly used batteries like dry cell need to undergo a recurring recharging process, but hydrogen fuel cell power modules only require Hydrogen and Oxygen reaction to generate power for driving.

RTSP1200-DPC,This coating system is exclusively used for the DPC (Direct Plating Copper) ceramic substrates process. The DPC ceramic substrates are widely used in various applications: for instance in high brightness LED to increase the longevity because of its high heat radiation performance, Semiconductor equipment, in microwave wireless communication, military electronics, various sensor substrates, aerospace, railway transportation, electricity power and much more.

RT-CsI950, Evaporation coating plant is applied to CsI film deposition for X-Ray Imaging devices. It is an advanced technique to evaporate CsI on the screen to create high quality images. The high-resolution performance allows this application to be extremely efficient and disruptive in the medical instrument, nuclear energy industry, security checking and inspection, high energy physics subjects and more.

Shanghai Royal Technology also successfully designed and developed Cube and Cylinder model large size Aluminum Vacuum Metalizing System which is used for Automotive Logo Board Coating.

     Live Locally, Think Globally is our Vision. We live our day to day business by the concept of “Integrity and Solidarity”, always striving for innovation to achieve win-win situations in our ecosystem of worldwide partners. As pioneers in the Vacuum Coating Equipment Industry, we never relied on previous accomplishments, but we continuously tried to explore the ever changing world of the Vacuum Coating Industry to always create optimal economic, social and environmental benefits for our customers.

ROYAL TECHNOLOGY'S CULTURE

ROYAL's Vision:  to be the worldwide famous brand supplier of providing total solutions to customers requirement.

ROYAL' Mission: protects the environment, saves our blue planet ; to improve labors tough working environment, enhance work efficiency, completely help owners to reduce production cost.

ROYAL's Philosophy: human-oriented, honest, innovative and make the greatest contribution to society.

ROYAL's Value: innovation, advanced technology’s R&D, serving China and worldwide's manufacturing industries.

ROYAL's Service: ONE-STOP service, with excellent technology and products, professional dedication to serve our customers.