400W 405W 400w 72 Cell Solar Panel Batteries

FSM400~FSM410M72H (400W/405W/410W) MONO PERC 144 Half Cell PV Module

Electrical Characteristics under STC (Irradiance 1000W/m², Cell Tem. 25℃, AM 1.5)

Mechanical Characteristics

Key Features

• Anti-reflective coated glass to increase module efficiency up to 2% and improve self cleaning ability.
• Mono PERC half cell design with less internal power loss to guarantee higher output power and higher module efficiency (up to 20.5%).
• Half-Cell series PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
• High transmittance tempered glass and cell surface textured design ensure excellent performance in low-light environment.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• Split junction boxes with high quality diodes to protect electric safety of the whole PV system.
• Mechanical load with high strength: front side max. 5400Pa and rear side max. 2400Pa as per IEC61215 & IEC61730 standards.
• Three channels of EL automatic detections, four times visual inspections and power test before packing.
• Full production from automatic equipment and production lines to eliminate human errors and scratches.
• Intelligent MES system applied on production lines for higher efficient production management and save waste.
• Around 0.55% annual power degradation and 30 years linear power damping warranty.
• Optimal packing solutions for container loading and shipment to ensure products safety during transportation.

Production Equipment

FINERGY started to bringing automatic equipment and production lines since 2006. The advanced facilities help us save waste and improve quality obviously. There're 110 operation staffs in FINERGY to cover 6 production line, with annual production capacity up to 800MW. Advanced MES information system was applied on the production line to manage and record the products data. The damaged/unqualified products will be separated on line. We promise each solar panel shipped to customer with perfect performance.

Advanced Production Line

EL Detection for Internal Quality Control

1MW Solar Power Project Construction in Greece

Finergy Tech is one of the pioneering solar PV companies in China that has been involved in the production of innovative solar photovoltaic modules from thin silicon cells with high efficiency. The basic materials for the production of photovoltaic modules are: silicon photovoltaic cells, EVA/POE film used to bond silicon cells with glass using the phenomenon of molecular bonding obtained at high temperature, and aluminum frames. The materials are delivered directly by manufacturers - world industry leaders, whose products are characterized by high quality and energy efficiency. The production of PV modules take place on automatic technological lines, which eliminates the risk of human error. Finergy brand solar modules are manufactured in accordance with international standards of IEC61215:2016 and IEC61730:2016. Currently, the capacity of the Finergy Tech production line allows for a production capacity of 500MWp per year. Finergy Tech continuously delivers high quality solar PV modules to customers worldwide, and products are widely used for houses, factories and public facilities in more than 60 countries such as Germany, Italy, Japan, Korea, Australia, Mexico, Chile, etc.

The company's strategy is to provide a product with the highest possible efficiency and quality, while at the same time taking care to maintain a relatively low level of prices for its modules. The company's goal is to promote a natural source of solar energy. The priority task is the quality policy. The company has a quality management system and the following quality certificate:
ISO 9001: 2008 - in the field of investment project management.

In the field of production management, Solar - Energy is certified under the following standards:

ISO 9001: 2008, ISO 14001: 2004, OHSAS18001:2007