24V Ground Mounted Solar Panels Perc 400w 144 Celdas Multi-Busbar

FSM390~FSM400M72L (390W/395W/400W) 72 Cells Typical Mono PERC PV Module

Electrical Characteristics under STC (STC: Irradiance 1000W/㎡, Cell Temperature 25℃, Air Mass 1.5)

Mechanical Characteristics

Products Description

• 9BB Mono Solar Cell adopts PERC technology to guarantee higher output power and higher module efficiency (up to 20.2%).
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• High transmittance low-iron tempered glass and cell surface textured design ensure excellent performance in low-light environment.
• Certified to withstand: front side max. 5400Pa, rear side max. 2400Pa.
• IP68 rated junction box with schottky diodes to protect the whole PV system damage.
• MC4 compatiable connectors for solar system easy installation.
• Three times EL inspections and power test before packing.
• MES system applied together with automatic production line to ensure each product data searchable and traceable.
• Full production from automatic equipment and production line to eliminate human errors and improve quality.
• 12 years product workmanship warranty and 30 years linear power damping warranty.

FAQ of FINERGY Solar Panels

Q1: What's the differences between 5BB and 9BB solar cells?

A: The only difference is efficiency if same size. The busbar on solar cells is the key for current circuit. For 9BB pattern, the current conduction is better than 5BB products. If you require higher power product with same dimension, we have to use 9BB solar cells to reach.

Q2: What's the production capacity of FINERGY?

A: FINERGY has lauched 3 workshops with automatic equipment and production lines. The products can cover both mono and poly crystalline with full cells and half cells assembly. The power ranges from 250W to 600W exactly. With full production, FINERGY can finish 5,000 picees of standard solar panels per day. The estimated production capacity of the company reaches appromixate 1GW per year.

Q3: Were FINERGY solar panels installed on any large solar power plant?

A: Hundreds MW solar panels produced by FINERGY are shipped to all over the world. For China domestic market, around 3.5MW FINERGY solar panels were structured on the workshop roofs in our factory. The solar system continued supplying the power consumption of FINERGY solar panels manufacturing. For abroad markets, 4.2MW mono PERC half cell solar panels were structured on ground in Sofades, Greece in July of 2020. Both of them are good references.

Production Workshop with Advanced Equipment

QC on Production Line

Global Exhibition

Finergy Tech is one of the pioneering solar PV companies in China that has been involved in the production of innovative solar photovoltaic modules from thin silicon cells with high efficiency. The basic materials for the production of photovoltaic modules are: silicon photovoltaic cells, EVA/POE film used to bond silicon cells with glass using the phenomenon of molecular bonding obtained at high temperature, and aluminum frames. The materials are delivered directly by manufacturers - world industry leaders, whose products are characterized by high quality and energy efficiency. The production of PV modules take place on automatic technological lines, which eliminates the risk of human error. Finergy brand solar modules are manufactured in accordance with international standards of IEC61215:2016 and IEC61730:2016. Currently, the capacity of the Finergy Tech production line allows for a production capacity of 500MWp per year. Finergy Tech continuously delivers high quality solar PV modules to customers worldwide, and products are widely used for houses, factories and public facilities in more than 60 countries such as Germany, Italy, Japan, Korea, Australia, Mexico, Chile, etc.

The company's strategy is to provide a product with the highest possible efficiency and quality, while at the same time taking care to maintain a relatively low level of prices for its modules. The company's goal is to promote a natural source of solar energy. The priority task is the quality policy. The company has a quality management system and the following quality certificate:
ISO 9001: 2008 - in the field of investment project management.

In the field of production management, Solar - Energy is certified under the following standards:

ISO 9001: 2008, ISO 14001: 2004, OHSAS18001:2007