9 Busbar Solar Photovoltaic Module 12v 450W Mono PERC 144 Half Cell

FSM440~FSM450M72HD (440W/445W/450W) MONO PERC 144 Half Cells Solar PV Module

Electrical Characteristics under STC (Irradiance 1000W/m², Cell Temperature 25℃, Air Mass 1.5)

Mechanical Characteristics

Product Information

• Mono PERC solar cells from gallium doped wafers to guarantee higher output power and higher module efficiency (up to 20.7%).
• Half Cell PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
• Excellent Anti-PID performance guarantee limited power degradation for mass production.
• IP68 rated split junction boxes with diodes to protect the full PV system safety, MC4 compatible connectors for easy installation.
• Advanced glass and cell surface textured design ensure excellent performance in low-light environments (e.g. early morning, dusk and cloud, etc).
• Three channels of EL automatic detections and power test before packing.
• Full production from automatic equipment and production line following with both IEC61215 and IEC61730 standards.
• MES system applied together with production line to ensure products information searchable and traceable.
• 12 years product material & craft warranty and 30 years linear power damping warranty based on around 0.55% annual power degradation.

FAQ of FINERGY

Q1: How many years does FINERGY manufacture solar panels?

A: FINERGY company was born in Wuxi, China in 2009. It started from manual production with lots of staffs, but small production capacity. From 2016, automatic equipment and advanced production lines were brought in the new workdshop. Till now, there're 6 automatic production lines in the factory. The production capacity can reach 800MW~1GW per year.

Q2: What's the main market for FINERGY?

A: At the beginning, the prices of solar panels were very expensive. All the solar panels produced by FINERGY were exported to Australia, Europe and USA. In the recent 5 years, the largest market is China. Some of the panels were installed on domestic PV projects, some were OEM manufactured for Chinese peers and traders.

Quality Certification Trade Mark

Automatic Production

QC During Production

Project Reference with FINERGY 450W half cell Solar Panels

Finergy Tech is one of the pioneering solar PV companies in China that has been involved in the production of innovative solar photovoltaic modules from thin silicon cells with high efficiency. The basic materials for the production of photovoltaic modules are: silicon photovoltaic cells, EVA/POE film used to bond silicon cells with glass using the phenomenon of molecular bonding obtained at high temperature, and aluminum frames. The materials are delivered directly by manufacturers - world industry leaders, whose products are characterized by high quality and energy efficiency. The production of PV modules take place on automatic technological lines, which eliminates the risk of human error. Finergy brand solar modules are manufactured in accordance with international standards of IEC61215:2016 and IEC61730:2016. Currently, the capacity of the Finergy Tech production line allows for a production capacity of 500MWp per year. Finergy Tech continuously delivers high quality solar PV modules to customers worldwide, and products are widely used for houses, factories and public facilities in more than 60 countries such as Germany, Italy, Japan, Korea, Australia, Mexico, Chile, etc.

The company's strategy is to provide a product with the highest possible efficiency and quality, while at the same time taking care to maintain a relatively low level of prices for its modules. The company's goal is to promote a natural source of solar energy. The priority task is the quality policy. The company has a quality management system and the following quality certificate:
ISO 9001: 2008 - in the field of investment project management.

In the field of production management, Solar - Energy is certified under the following standards:

ISO 9001: 2008, ISO 14001: 2004, OHSAS18001:2007