3000w Copper Cable Stripping Machine For 20-120mm Cables

3kw Copper Cable Stripping Machine For 20-120mm Cables

Description of copper cable stripping machine

This copper cable stripping machine is a wire stripper developed by our company specifically for high-voltage cables, submarine cables and armored cables. The machine can easily adjust the height of the blade. It can be easily adjusted for all kinds of cables with different wire diameters, greatly increasing the work efficiency.

Technical specification of copper cable stripping machine

Features of copper cable stripping machine

1. Hatchback design, in line with ergonomic design.
2. Adopt oil and gas self sufficiency of the two conjoined, regular oil to the cylinder to reduce cylinder internal mill tax loss and prolong life.
3. Unique slide style, reciprocating stroke smooth, accurate cutting and stripping.
4. Llight and agile, easy operation.
5. Adjustable structure, line of sight material and fine adjustment.
6. Suitable for processing of large diameter long wire, cable.

Operating instructions of copper cable stripping machine

1. Start the motor and check whether the operation is normal. During feeding, check the diameter of rubber and plastic cables wrapped in each gear and feed them one by one in turn.

2. In order to make the blade durable for a long time, the joint of rubber and plastic cable should be cut off during feeding to avoid blade notch collapse.

3. If the feed is too deep and broken after coming out, pay attention to the following:

① Adjust the tightness of the feed stop, that is, the M12 screw pressure on both sides of the blade shaft;

② Check whether the position is misplaced during feeding;

③ Whether the blade is replaced and whether the blade edge is too sharp shall be slightly trimmed with a special oilstone until it is appropriate.

4. If the rubber and plastic have been stripped after the feed comes out, but the copper wire cannot be spit out.

There are four main points:

① If the knurling of the upper shaft is too deep, the upper shaft shall be polished with a special oilstone, but it shall not be polished too much. Too much grinding is easy to make the oily cable difficult to drive;

② If the spring pressure is too loose, the pressure shall be adjusted tightly to stop spitting;

③ If the wire diameter is too small or there is too much clearance between the upper and lower shafts, the clearance between the two shafts shall be adjusted to 0.4 --- 0.6mm;

④ The processed rubber and plastic cable has been heated, and the copper wire can't spit out.

5. After feeding, if the agent pressure stop cannot drive the cable and the material stays in the middle, the following situations occur:

① Check whether the belts of all gears are loose;

② Check whether the spring pressure on both sides of each gear is too tight and there is no jacking force, and relax the pressure;

③ If the cable is too oily and the two shafts slip, the two shafts should be wiped dry frequently (please pay attention to safety if the machine is running when wiping dry).

Henan TMS Machinery Co, Ltd is located in Zhengzhou city, Henan province, China. We are specialized in manufacturing the scrap metal recycling equipment, such as copper wire granulator, copper wire stripping machine, scrap metal baler, radiator recycling machine, motor stator recycling machine, metal shearing machine, dual shaft shredder, blade sharpener machine etc.

Our company process professional sales group, technical engineer and perfect after-sales team. We firmly believe that quality is the only standard for enterprises to survive. The quality of products we manufactured is superior. And our engineer will provide professional technical analysis and recommend suitable equipment to customers. At that time, to make client use our machine without any worries, best after-sales service is also supplied to everyone. Our after-sales person will follow your order in 24 hours.

By now, our machines are sold to all over the world. Just like Europe (France, US, Poland, Norway, Spain, Malta, Czech Republic, Italy etc), Americas(USA, Canada, Mexico, Brazil, Colombia etc), Australia(Australia, New Zealand), Asia(Thailand, Korea, India, Pakistan, Singapore, Malaysia, Sri Lanka, Saudi Arabia, Indonesia, Qatar, Dubai), Africa(Morocco, Ghana, Tanzania). In our factory, there are many advanced manufacturing facilities and almost 50 experienced workers, we have ability to produce 100-200 sets machine and 50 sets large production line per month. We can meet customers’ demand for kinds of recycling equipment.

Our company business aim is that Credit first, customer first, quality satisfaction, delivery on time, and willing to cooperate with you sincerely, development hand in hand. In the future, we will adhere to the company's philosophy and continue to provide customers with better products and quality services. With Joint efforts of our team, we can make our company bigger and stronger.