56G QSFP+ Active Optical Cables AOC Hot Plugable 38pin Connector

56G QSFP+ Active Optical Cables AOC Hot Plugable 38pin Connector

56G QSFP+ Active Optical Cable AOC JNP-56G-AOC-3M Juniper Networks Compatible

Description:

OLSQ85XA-CDM3 is designed so that 56GbE devices are designed with very high port density based on electrical and mechanical specifications.

Product Features

* Fully RoHS Compliant

* Full channel operating up to 56.1Gb/s

* Hot plugable 38pin connector

* Cable length up to 3m

* Low power consumption: ＜1.5W

* 0℃ to 70℃ operating wide temperature range

* Single +3.3V±5% power supply

* Digital Monitoring feature

* Metal enclose for lower EMI

Absolute Maximum Ratings

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

Optical Characteristics (TOP(C) = 0 to 70 ℃, VCC = 3.13 to 3.47 V)

Electrical Characteristics (TOP(C) = 0 to 70 ℃, VCC = 3.13 to 3.47 V)

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured at the BER less than 1E-12, back to back. The measure pattern is PRBS 2^31-1 with worst ER=4.5@ 10.3125Gb/s.

3. Internal AC coupled

4. TX-Disable has an internal 4.7KΩ to 10 KΩ pull-up to VccT

5. Measure with 4.7KΩ pull-up to Vcc on host board

Cable Mechanical Specifications

Ordering Information

Shenzhen Olinkcom Technology Co.,Ltd established in the year of 2011, is a professional manufacturer of optical transceivers. We are dedicated to designing, developing, production and distributing optical transceivers to fulfill customer’s requirements for optical communication. Olink is able to offer a vast range of optical modules from 155Mbps ~ 100Gbps, including CFP2, QSFP+, XFP, SFP+, SFP, PON and CWDM, DWDM solutions, to support various protocols and meet with different requirements on Fiber Channel, Ethernet, SONET/SDH, FTTx, Data Center etc. And all product quality is backed by our strong R&D ability, rigorous quality control procedure and rich production experience. Our modules are exported to China domestic market, Asia, Southeast Asia, Europe and the American market, etc.

With the concept of “Quality First, Service Oriented, Realistic and Innovative, Continuous Improvement”, Olink keeps developing and optimizing product design solutions, to provide our valued customers with the most cost efficient product and service, as well as some customized products.