PM/31062 Industrial Air Springs Norgren PM/31000 Bellow Suspension

PM/31062 Norgren Air Spring PM/31000 With Horizontal Aluminum Alloy Cover For Lifting Device of Paper Machine

PM/31062 Norgren Air Spring PM/31000 product description:

The air spring shock absorber PM/31062 Norgren Air Spring PP M/31000 can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber PM/31062 Norgren Air Spring P M/31000 to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber PM/31062 Norgren Air Spring P M/31000 must be used to absorb the force

• Before disassembling the air spring shock absorber PM/31062 Norgren Air Spring P M/31000 , the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber PM/31062 Norgren Air Spring P M/31000 shall not be in contact with other parts

PM/31062 Norgren Cross OEM Original Equipment Manufacturer:

Norgren:PM/31062

Norgren:PM/31000

Firestone W01-R58-4053 - (6 x 2 Steel )

Firestone W01-R58-4070 - (6 x 2 Alu )

NORGREN AIR BELLOWS 6 X 2 PM/31062

Specifications and Detail Technical Parameters

❶Nut/blind nut
Screw (nut) teeth on the upper cover plate: 4 X M8

Screw (nut) teeth of the bottom cover plate: 4 x M8

❷Air hole/air inlet/air fittings
Air hole/air inlet: G1 / 2

❸Cover plate
Top plate diameter (width): 153.5 mm

Diameter (width) of the bottom cover plate: 153.5 mm

Material top and bottom plate: aluminum

Bell rubber bellows
Maximum diameter at 7 bar: 175MM

Rubber bellows stroke: 80mm-195m

❺Bumper block/bumper block
No bumper block
❻Belt loop/Belt loop
There is a belt hoop: a belt hoop

Maximum load at 80 mm height and 8 bar: 1415 daN

Size-Diameter: 175.0 mm
Size-Length: 115.0mm
Size-weight: 2.700 kg
Size-Unit of Measurement: EA
Performance-shelf life: 5 years
Range: PM / 31000

Medium: compressed air
Stomatal size: G1 / 2
Operation mode: single action
Working pressure: 0 bar-8 bar
Working temperature: -30°C-50°C
Stroke length: 115 mm
Theoretical power: 10600 N
Certification-REACH: available on request
Certification-RoHS compliant: available on request
Classification-eClass 11: 51010390
Classification-HS Code: 87088090
Classification-HTS code: 8708809000

PM/31062 Norgren Note of usage:

-Make sure that the bellows does not
Constant contact with hydraulics
Oil, lubricant,
Solvents, metal shavings and
Welding sparks.
-Whether to deal with air bellows
To the special media in the app,
Ask Norgren for more information,
Specified medium, temperature
And concentration must have enough gap
The surrounding bellows.
-The entire surface of the metal part is
Used to bear
force.
-Must be equipped with air bellows
With lateral guidance.
-Before completely venting the bellows
delete.

Other kinds of model air bellows:

Firestone W01-R58-4053 - (6 x 2 With Steel Cover Plate )

Firestone W01-R58-4059 - (10" x3 with Steel Cover Plate)

Firestone W01-R58-4054 - 8x1 With Steel Cover Plate

Firestone W01-R58-4028 - 8"x1 Epichlorhydrin

Spar Part Bellow 8"x2 W01-R58-4045

Firestone W01-R58-4064 -14" 1/2 x2

Firestone W01-R58-4063 -14 1/2 x1

Bellow only 8" x 1 -- W01-R58-4085

Firestone W01-R58-4048

W01-R58-4080 - 2 3/4" x 2

Firestone W01-R58-4060- 12" x2 with Steel Cover Plate

Firestone W01-R58-4070 - (6 x 2 V2a )

Firestone W01-R58-4051E 4,5 x 2 Stainless With Steel Cover Plate

Firestone W01-R58-4050

W01-R58-4080 - 2 3/4" x 1

W01-R58-4081 (2 3/4" x3)

W01-R58-4051 Dunlop Style 4,5 " x 2

W01-R58-4052 - (6" x1 with Steel Cover Plate)

Firestone W01-R58-4057 - (10 x1 with Steel Cover Plate)

Firestone W01-R58-4027 - 8x2 (Epichlorhydrin / Herclor)

Firestone W01-R58-4090 - 8"x2 Butyl

Firestone W01-R58-4055 - 8x2 With Steel Cover Plate

Firestone W01-R58-4060 (12 x1 with Steel Cover Plate)

Firestone W01-R58-4077 (12 x1 Herclor )

Firestone W01-R58-4056 -8"x3 With Steel Cover Plate

Firestone W01-R58-4062 (12 x3 With Steel Cover Plate)

Firestone W01-R58-4065 (14 1/2 x3 With Steel Cover Plate)

Firestone W01-R58-4098 (14 1/2 x1 Herclor)

Firestone W01-R58-4097 (14" 1/2 x2 Herclor)

Firestone W01-R58-4025 - (10" x1 Epichlorhydrin/Herclor)

Firestone W01-R58-4078 - (6 x1 Aluminum Alloy )

Firestone W01-R58-4070 - (6 x 2 Aluminum Alloy )

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.