Home Security Wireless Carbon Monoxide Alarm Detector With LED Display

Home Security Wireless Carbon Monoxide Alarm Detector With LED Display

Carbon Monoxide Detector(CO detector), use of high quality electrochemical sensors, combined with advanced electronic technology and sophisticated technology made of a stable work, long life and other advantages; can be placed on the ceiling or wall mount and other installation methods, simple installation,easy to use; Where carbon monoxide gas is present, once the concentration of carbon monoxide gas reaches the alarm setting value, the detector will emit an audible and visual alarm signal to remind you to quickly take effective measures to effectively avoid the occurrence of fire, explosion, suffocation, death and other malignancies.

WARNING
Exceeding the temperature and humidity allowable range may reduce or lose the detection function.

SPECIFICATION

OPERATION INSTRUCTIONS

1) The battery is correctly loaded into the detector with positive and negative polarity, The buzzer emits a "beep" sound and the detector starts to warm up for 40s. the LCD screen displays the count down, at this time, the detector has no detection function; after 40s, The detector enters the normal monitoring state and the LCD screen is normally closed. When the measured value of the measured gas in the air is bigger than 20×10-6, the LCD displays the real-time concentration of the measured gas in the environment.

2) When the concentration of the measured gas in the environment reaches the alarm setting value, the detector emits an audible and visual alarm indication.

3) Green power indicator, flashing once every 35 seconds, indicating that the detector is working.

4) Red alarm indicator. When the detector enters the alarm state, the red alarm indicator flashes rapidly and the buzzer sounds at the same time. The alarm of the alarm signal makes four cycles, each cycle is 100ms on/100ms off. Then turn off for 2 seconds until the CO concentration drops below the alarm setting value.

5) This CO alarm has an automatic self-test function to detect any failure of hardware, which is performed about every 1 minute in normal standby status.

Yellow fault indicator keeps on, the buzzer sounds 2 times per 8 second, indicating that the sensor has failed, at this time, there is no detection alarm function. Please contact Dealer for repair. It is extinguished after lighting for 50ms every 35 seconds, at the same time, sounds a "drip", indicates that the battery is under voltage (≦3.6V) and a new battery needs to be replaced.

Fault/Failure or error messages may be due to permanent damages such as short or open circuit of the sensor, or electric damage. Also, there may be temporary failures or errors due to slight shock of volatile chemical gases such as ethyl alcohol. In this case, the alarm can be recovered after 24 hours in pure air.

A permanent damage occurs when the failure or error information from the alarm is unrecoverable after 24 hours in pure air.

WARNING

Please stop using permanently damaged alarm! Do not make unauthorized disassembly, repairing, or delivery to those authorized service points that are not designated by the manufacturer.

FAQ

Q: How can i place an order?
Please provide the details of your requirements as clear as possible. So we can send you the offer at the first time.
A: For designing or further discussion, it is better to contact us with Skype / email / phone, in case of any delays.

Q: How about the quality of the personal alarm ?

A:We produce every product with good quality materials and fully test three times before shippment. What is more, our quality

areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.

Q: Can i have a sample order?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q:What is your terms of delivery?
A: We accept EXW, FOB, CFR, CIF, DDU, DDP, etc. You can choose the one which is the most convenient or cost effective for you.

Q: How do you ship the goods and how long does it take arrive?

A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.

Shenzhen Ariza Electronic Co., Ltd was founded in 2009 in Shenzhen, we are specialized factory with strength of security alarm products for 12years.Covering an area of 2000 square meters and we have 12 years experience on this market and have been one of the leading manufacturers of electronic personal security devices.OEM/ ODM is surpported, we pay more and more attention to new products development.

We have designed various popular models with Ariza features and own the patents and hundreds of new models for our clients all over the world, our clients such us: iMaxAlarm, SABRE, Home depot .

Workshop covering an area of 1000 square meters. We not only owns advanced production equipment but also have over 50 valuable and skilled employees.The monthly output reaches 100000PCS and 90% products being exported to overseas markets mainly in EU and North America.

Moreover, We have a comprehensive quality assurance systems and equipments, in addition to well-equipped laboratories and testing equipments. Systems of IQC, PQC,and FQC all ensure the quality of our products Finished product warehouse and raw material warehouse covering an area of 600square meters. We have enought room for finished goods, so the lead time is very short, the order of less than 1000 can be delivered within 3 days.

We also have gained certifications from the third party organizations, factory has passed BSCI, ISO9001 and all products are internationally recognized with CE or RoHS, FCC compliance for exporting to all over the world.

"Customer First"is our business faith, and we would like to share our knowledge, technologies and experience with more customers for mutual benefits and development.We will do our best to provide satisfied products and competitive prices for our customers. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.