Product Details
Company Profile

Pn16 St37.2 C22.8 Wnrf Forged Steel FLANGE DIN EN 1092-1

STEEL FLANGE DIN EN 1092-1 TYPE01 PLATE FLANGE LAP JOINT FLANGE FORGE FLANGE ST37.2 C22.8 WNRF FLANGE

1, This DIN Standard for a single series of flanges specïfies requirements for circular steel flanges in PN designations PN 2.5 to PN 100 and nominal sizes from DN 10 to DN 4000. This standard specifies the flange types and their facings, dimensions. tolerances. threading. bolt sizes. flange jointing face surface finish. marking. materials. pressure/ temperature ratings and approximate flange masses. This standard does not apply to flanges made from bar stock by turning, or to flanges of types 11, 12 and 13 made from plate material.

2, Normative references This DIN Standard incorporates by dated or undated reference provisions from other pubIicatons. These normative references are cited at the appropnate places in the text and the pubIicatons are listed hereafter. For dated references, subsequent amendments to or revïsïons of any of these publications appy to this European Standard only when incorporated in t by amendment or revision. For undated references the atest edition of the publication referred to appiies (inciuding amendments).

Material	:	1. Stainless Steel ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN1.4301, DIN1.4306, DIN1.4401, DIN1.4404, DIN1.4308, DIN1.4408, DIN1.4306, DIN1.4409 2. Carbon Steel ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN1.0402, DIN1.0460, DIN1.0619
Dimension	:	EN 1092-1
Size	:	DN10 ~ DN4000
Pressure	:	PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400
Type No.	:	Type 01 Plate Flange (slip on) for Welding, Type 02 Loose Plate Flanges with Weld On Plate Collar or for lapped pipe end, Type 04 Loose Plate Flanges with Weld Neck Collar, Type 05 Blind Flange, Type 11 Weld Neck Flange, Type 12 Hubbed Slip On Flanges for Welding, Type 13 Hubbed Threaded Flanges, Type 21 Integral Flange, Type 32 Weld on Plate Collar, Type 33 Lapped Pipe End, Type 34 Weld neck Collar, Type 35 Welding Neck, Type 36 Pressed collar with long neck, Type 37 Pressed Collar
Face Type	:	A - Flat Face (FF), B - Raised Face (RF), C - Tongue, D - Groove, E - Spigot, F - Recess, G - O-ring spigot, H - O’ring groove
Coating	:	Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanize

SIZE	MATERIAL	FLANGE TYPE
1/2"-80"	Stainless Steel	weld neck flange
		Slip on Flange
		socket weld flange
		LAP Joint Flange
		Threaded flange
		blind flange
	CARBON STEEL, STAINLESS STEEL	weld neck flange
		Slip on Flange
		socket weld flange
		LAP Joint Flange
		Threaded flange
		blind flange
	Sealing face of flanges	RF with serrated finish
		FF with 3 waterlines
		FF with smooth finis
		RTJ (Ring Joint Type)
		FF with serrated finish
		RF with water lines

types of flanges (typ) up to DIN EN 1092-1

Typ 01: Plate (slip-on) flanges for welding	Typ 13: Hubbed threaded flanges
Typ 02: Loose plate flanges with weld-on plate collar	Typ 21: Integral flanges
Typ 04: Loose plate flanges with weld-neck collar	Typ 32: Weld-on plate collars
Typ 05: Blank (blind) flanges	Typ 33: Lapped pipe ends
Typ 11: Weld-neck flanges	Typ 34: Weld-neck collars
Typ 12: Hubbed slip-on flanges for welding

D: Outside Diameter
K: Diameter of Bolt Circle
L: Diameter of Bolt Hole

A: Outside Diameter of Neck
E: Chamfer
F: Collar thickness

G max: Diameter of Shoulders
R: Corner Radius
N: Neck Diameter
S: Neck Thickness (Preferred value)

DN	Mating dimensions					A	Bore Diameter			Flange Thickness				E	F	G max	Length			Neck Diameters			R	S
	D	K	L	Bolting			Bore Diameter			Flange Thickness							Length			Neck Diameters
	D	K	L	No	Size		B1	B2	B3	C1	C2	C3	C4				H1	H2	H3	N1	N2	N3
	Flange type
	01, 02, 05, 11, 12, 21					11 21* 34	01 12 32	02	04	01 02 04	11 12 13	21	05	02 04	32 34	05	12 13	11 34	11 34	11 34	12 13	21	11 12 13 21	11 34
10	Usar dimensiones PN 40
15
20
25
32
40
50	165	125	18	4	M16	60.3	61.5	65	77	19	18	18	18	5	16	-	28	45	8	74	84	84	5	2.9
65	185	145	18	**	M16	76.1	77.5	81	96	20	18	18	18	6	16	55	32	45	10	92	104	104	6	2.9
80	200	160	18	8	M16	88.9	90.5	94	108	20	20	20	20	6	16	70	34	50	10	105	118	120	6	3.2
100	220	180	18	8	M16	114.3	116	120	134	22	20	20	20	6	18	90	40	52	12	131	140	140	8	3.6
125	250	210	18	8	M16	139.7	141.5	145	162	22	22	22	22	6	18	115	44	55	12	156	168	170	8	4
150	285	240	18	8	M20	168.3	170.5	174	188	24	22	22	22	6	20	140	44	55	12	184	195	190	10	4.5
200	340	295	22	12	M20	219.1	221.5	226	240	26	24	24	24	6	20	190	44	62	16	235	246	246	10	5.9
250	405	355	26	12	M24	273	276.5	281	294	29	26	26	26	8	22	235	46	70	16	292	298	296	12	6.3
300	460	410	26	12	M24	323.9	327.5	333	348	32	28	28	28	8	24	285	46	78	16	344	350	350	12	7.1
350	520	470	26	16	M24	355.6	359.5	365	400	35	30	30	30	8	26	330	57	82	16	390	400	410	12	8
400	580	525	30	16	M27	406.4	411	416	454	38	32	32	32	8	28	380	63	85	16	445	456	458	12	8
450	640	585	30	20	M27	457	462	467	500	42	40	40	40	8	30	425	68	87	16	490	502	516	12	8
500	715	650	33	20	M30	508	513.5	519	556	46	44	44	44	8	32	475	73	90	16	548	559	576	12	8
600	840	770	36	20	M33	610	616.5	622	660	52	54	54	54	8	32	575	83	95	18	652	658	690	12	8.8
700	910	840	36	24	M33	711.1	-	-	-	-	36	42	48	-	-	670	83	100	18	755	760	760	12	8.8
800	1025	950	39	24	M36	813	-	-	-	-	38	42	52	-	-	770	90	105	20	855	864	862	12	10
900	1125	1050	39	28	M36	914	-	-	-	-	40	44	58	-	-	860	94	110	20	955	968	962	12	10
1000	1255	1170	42	28	M39	1016	-	-	-	-	42	46	64	-	-	960	100	120	22	1058	1072	1076	16	10
1200	1485	1390	48	32	M45	1219	-	-	-	-	48	52	76	-	-	1160	-	130	30	1262	-	1282	16	12.5
1400	1685	1590	48	36	M45	1422	-	-	-	-	52	58	-	-	-	1346	-	145	30	1465	-	1482	16	14.2
1600	1930	1820	56	40	M52	1626	-	-	-	-	58	64	-	-	-	1546	-	160	35	1668	-	1696	16	16
1800	2130	2020	56	44	M52	1829	-	-	-	-	62	68	-	-	-	1746	-	170	35	1870	-	1896	16	17.5
2000	2345	2230	62	48	M56	2032	-	-	-	-	66	70	-	-	-	1950	-	180	40	2072	-	2100	16	20

* For flanges type 21 the outside hub diameter approximately corresponds to the outside pipe diameter.

Note : The p/t rating from EN 1092-1 apply only for flange type 05, 11, 12, 13 and 21 having nominal sizes up to and including DN 600. The p/t rating of all other flanges shall be agreed between the manufacturer and the purchaser.

Product Tags:


*From:	Your email address is incorrect!
*To:	Hebei Xinfeng High-pressure Flange and Pipe Fitting Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Categories	FLANGE DIN EN 1092-1
Brand Name:	XF
Model Number:	XF-FLANGE016
Certification:	ISO, CE
Place of Origin:	CHINA
MOQ:	2TONS
Price:	USD1160/TON TO USD2270/TON
Payment Terms:	L/C, D/P, T/T
Supply Ability:	5000TONS/MONTH
Delivery Time:	10-45DAYS
Packaging Details:	PLYWOOD CASES AND PALLETS
FLANGE TYPE:	WN FLANGE, SO FLANGE, BLIND FLANGE, SW FLANGE, PLATE FLANGE, LAP JOINT FLANGE
PRESSURE:	PN6, PN10, PN16, PN25, PN40, PN63, PN100
STANDARD:	ANSI B16.5, ANSI B16.47A, ANSI B16.47B, AWWA CLASS D, DIN, EN1092-1
SIZE:	1/2" TO 80", 0.5 INCH TO 80 INCH
SURFACE TREATMENT:	BLACK PAINTING, YELLOW PAINTING, GALVANISING, ANTI-RUST OIL
SEALING FACE FLANGE:	RAISED FACE (RF), FLAT FACE (FF), RING JOINT TYPE(RTJ)
Package:	Sea worthy plywood cases/pallets
Price Term:	FOB, CIF, CFR
Production period:	less than 60tons within 30days, more than 60tons 50days
Certificate:	PED, ISO
MATERIAL:	SS304/304L SS316/316L CARBONS TEEL ST37.2, C.S. S235JR, P245GH, SS304/L, SS316/L