Semi Automatic 15-30m/Min 1.0mm Steel Slitting Line

Industry leading semi-automatic slitting machine

What is the working principle of the slitting machine?

The slitting machine consists of five parts: uncoiling-leveling-slitting-squeezing-rewinding

Technical Parameters of Industry leading semi-automatic slitting machine

The uncoiling part of the slitting machine is to place the large roll of material on the uncoiler, and then unwind the material roll through the uncoiler

The leveling part of the slitting machine is to flatten the unfolded material roll to ensure the flatness of the material (because the material is in a bent state after the large roll of material is unfolded, in order to ensure the dimensional accuracy of the slitting, the roll material needs to be leveled)

The slitting part of the slitting machine conveys the flattened roll material to the slitting machine, and cuts the material one by one through the extremely sharp circular blades at different distances in the slitting machine, so as to achieve the required slitting of the material Broadband roll material.

The squeezing part of the slitting machine is used to assist the rewinding of the later roll material (because the roll material after slitting is relatively loose, if the rewinding is carried out directly, the roll material after the rewinding is loose and difficult to pack or store, and It may cause winding during the rewinding process, so the squeezing device is needed to assist the rewinding)

The rewinding part of the slitting machine is assisted by the extrusion device to rewind the multi-slice material after slitting to facilitate the next production, storage and transportation.

Liming Stamping Form Machine Co., Ltd. was established in 1995. After 27 years of unremitting efforts, it has been developed from the state-owned old factory with 8 employees to the current group with 360 employees and the overall solution provider for industrial chain customers with various roll forming machines.

Currently, Liming has 4 production plants and one Headquarters R&D and Design Center. The four factories have a total area of 55,000 square meters. Liming has developed from a single roll forming machine manufacturer into the "National Building Material Equipment R&D Center", "Steel House Design and Installation Company", "Metal Cold Bent Profile Entrusted Processing Company", and has become the overall solution provider for the metal construction industry, metal decoration industry, solar photovoltaic industry, rolling door industry, metal fence post, agriculture planting industry ... with 36 kinds of cold-formed metal profiles and products.

Our designers are world-class, and go to the first-class machinery factories in Finland, Germany and France to learn the advanced manufacturing technology and services from European factories every year, so as to improve ourselves and help customers to obtain European machinery and service with minimal project investment.

It's as simple as you provide only one picture, we are capable of making a complete set of 3D drawings, profile use scenarios, workshop site planning and VR composition of roll forming machine. You can 100% realize the mechanical drawings and configurations before ordering.

It solves the problems of cheat by those companies that deceive you with low prices and low quality, and avoids different goods ordered and delivered. You should get the clear mechanical display for your equipment when purchasing.

Please believe us due to our development history with constant efforts, reject the low-quality competitive small factories and trade companies that change industries at any time with our technology and strength. Please give us a chance to show you every aspect of our group.