5A Normally Open Temperature Switch Bimetal KSD9700 Thermal Switch

250V 5A 10A KSD9700 Normally Open Closed Thermal Protector Bimetal Temperature Controller Switch Thermostat

Product Description

Normally Closed: When the temperature falls to the reset temperature, the thermostat contact can be connected again. (If the reset temperature is not reached, the thermostat contact is also disconnected)

Normally Open: When the temperature falls to the reset temperature, the thermostat contact can be disconnected again. (If the reset temperature is not reached, the thermostat contact is also connected)

Product Features

• small size,
• quick action,
• accurate temperature control,
• large current control
• long service life
• Wide used in home appliance's motor and electrical equipment, such as air conditioner motor, transformer, thermal appliances, etc

Specification

(KSD9700 thermal switch, thermal protector, bimetal thermostat)

Dimension & Structure

KSD9700-A is metal case while KSD9700-B is plastic case.

How it works?

KSD9700 series thermal protector consists of dish-shape high sensitive bimetallic elements,

movable contact-head, static contact-piece, soleplate, outer case, heat-resistant leads and so

on.When it is in operation, the bimetallic elements are in a free state and the movable

contact-head and the static contace-piece are closed and the circuit is on.When the electric

appliance malfunctions and causes temperature to rise to the action temperature of the thermal

protector, inner stress is produced inside the heated bimetallic elements and the bimetallic

elements act instantly -pushes the movable contact-head away from the static contact-piece,

thus cutting off the faulty circuit and protect the appliance.When the temperature of the electric

appliance to be protected drops to the rated reset temperature, the bimetallic elements restores

to its initial state and contact is closed .The electric appliance restores its working condition.

This product has many advantages, such as low resistance, fast temperature sensing, prompt

action, safety and reliability, small size and so on.

Please Note :

• During installation, the temperature switch should be completely close to the mounting surface of the tested appliance.
• Do not collapse or deform the plastic / metal shell during installation.
• For metal temperature controller, when using, do not remove the insulating sleeve to avoid electric leakage. Not suitable for working in water.
• Not suitable for air temperature sensing, only applies to contact sensing.

Standard Package

100pcs per bag, 20000pcs per carton

Shipping Term:

EXW, DDU, DDP, C&F, FOB

Shipping Methods:

International Express, By Air, By Sea

Selection of the Fuse and Holder Solution

The first step is to answer the following questions:

• Will the fuse need to accessible for replacement?
• How often will the fuse need to be replaced?
• Should the end customer of the appliance have access to change the fuse?
• Should the fuse only be accessible from outside the appliance?
• How much is available to spend on safety and reliability?

5.1.2. Requirements and characteristics

The most important standards for fuse-holders, which specify requirements, characteristics and testing methods are:

• IEC-publication 257 (1968) and Amendment no. 2 to this publication dated January 1989.
• UL-standard no. 512.

• 
• Company warehouse
• 

250Vac

• Founded in 1999, we have been focused on manufacturing over-current, over-temperature and other circuit protection components.
• Our main products include fuses, fuse holders, thermal switches, circuit breakers and temperature sensors, which are widely used in various kinds of electronic devices, such as consumer electronics, mobile terminals, household appliances, lighting appliances, power supplies, adapters, automobile and marine applications. We have acquired ISO9001/UL/cUL/VDE/CCC/CQC safety certificates.
• After serving our valuable clients in China market over 20 years, we have become one of the leading suppliers of circuit protection components.
  

1999 REOMAX Electronics(HK) was founded.

2003 REOMAX factory was founded

2007 IS0 9001 approved

2009 Name changed to Dongguan Reomax

2011 CQC、CCC、UL、cUL and VDE were certified.

2011 Member of CEEIA

2012 VDE certified

2012 Fuse patents were acquired

2013 PSE and KC approved

2014 REOMAX trademark applied

2014 1206/0603/2410/6125 fuses were developed

2015 Fully automatic machines were put into production。

2016 Testing machines were improved

2017 High voltage and high current testing machines were put into use. XR inscpention euqippemnt was brought in.

2018 6125 1808 2410 were certified by CQC and KC

2019 6125 was certified by VDE

2019 1032 and 1245 were certified by UL

2020 Square fuses of high current and high voltage were certified by TUV.