CE MSDS SARS-CoV-2 Saliva Antigen Test Kit High Accuracy Art Test Kit

Rapid Antigen Test Kit SARS-CoV-2 Antigen Saliva Rapid Test Kit High Accuracy Antigen Rapid Test Kit

Intend Use

This rapid test kit is intedded for the qualitative detection of SARS-CoV-2 antigen in saliva sample wihch also can be used to detect saliva sample from novel coronavirus suspected person with symptoms within 9 days. The test result of antigen test can be used for early triage and rapid management of suspected popu;ations, but it cannot be used as diagnosis basis of SARS-CoV-2 infection and as the sole basis for treatment or patient management decidions. Fuether nucleis acid detection should be carried out for suspected population whose antigen test result is positive or negative

Product Details

Product Feature

• Responsive, High accuracy and stability, Immunochromatography Assasy
• Quick check, Easy to use in sample operate step, 15 minutes out od results
• Clear result , High product quality, the result is clear and easy to read

Test Principle

This kit is an immunochromatography assay. According to the gold immunochromatographic test principle, double antibody sandwich method was used to detect SARS-CoV-2 nucleocapsid antigen in the samples. When there is virus antigen presence in the sample, the antigen binds with the corresponding colloidal gold monoclonal antibody and the coated monoclonal antibody at the detection line to form a compound and then condenses into a red band, indicating a positive result. If there is no antigen in the sample, complex cannot be formed at the detection line, and no red band is shown, indicating negative result.

Whether the sample contains antigen or not, the gold monoclonal antibody will bind to the enveloped antibody at the quality control line, form a compound and condense into a red band.

• Main Components
• Test Cassettes
• Saliva Collectors With Collection Tubes
• Sample Extraction Buffer
• Tube stand
• Package Insert

Use Step

• Open the cap of the collection tube and istall saliva collector.
• Put the collection tube with saliva collector close to lips and let the saliva flow into the collection tube. Tje volum of saliva needs to be half of 0.5 scal mark(0.25).
• Screw the sample extraction buffer carefully.

• Add all sample extration buffer to the collection tube. Discard the saliva collector, tighten the cap onto the specimen collection tube.
• Shake the specimen collection tube at least three time vigorously to mix the saliva and the extraction buffer. Squeeze bottom of the collection tube ensure the saliva is thoroughly mixed.
• Add 3 full drops of the solution to the sample well(S). Read the result at 15 minutes. Do not interpret the result after 20 minutes.

Result Interpretation

• POSITIVE: Two (2) distinct colored lines appear. One line should be in the control region (C) and the other line should be in the test region (T).

• NEGATIVE: One (1) colored line appears in the control region(C). No apparent colored line appears in the test region (T). The negative result does not indicate the absence of analytes in the sample, it only indicates the level of tested analytes in the sample is less than the minimum detection limit.

• INVALID: No colored lines appear, or control line fails to appear, indicating that the operator error or reagent failure. Verify the test procedure and repeat the test with a new testing device.

Virus Sources

Certificate

Labnovation Technologies, Inc. is an original manufacturer established in Shenzhen, China since 2001. We are dedicated in developing and manufacturing IVD instruments and reagents including HbA1c analyzer and reagents, rapid test reader & reagents, hematology reagents, clinical chemistry reagents, electrolyte reagents, wash solution and urine test reagents.
 

Labnovation products are developed in house, tested extensively in clinics and passed strict quality controls. All of our products are CE marked and approved by SFDA. In the past 15 years, our products have been exported to 110 different countries and used in 8000 hospitals worldwide. We provide both ready-to-use final products and bulk OEM reagents, including ready-to-use reagents, concentrated, and powder.

With an investment of 10% of our annual sales into R&D, we release new products every years. We win more and more domestic and international cooperation by company reputation and products quality while we actively take part in fairs like MEDICA,AACC, ARBA HEALTH and so on through which we are well-known by the companies in this field.