Carbon Steel 2.0mm Ansi B16.9 Pipe Fitting Bend

Carbon Steel 2.0mm ANSI B16.9 Pipe Fitting Bend

Description:

The difference between Pipe Fitting Bend and elbow

　　Bend is a generic term for any offset or change of direction in the piping. It is a vague term that also includes elbows. An elbow is an engineering term and they are classified as 90 deg or 45 deg, short or long radius. Elbows have industrial standards and have limitations to size, bend radius and angle.

　　Pipe elbows and pipe fitting bends are both very common pipe fittings products which are used to change the flowing direction in a piping systems.Some times they are interchangeable,but not same.

　　A pipe fitting bend means a piece of pipe which are bent to some angle to join two pipings.They can be nearly any bending radius and angles.Pipe Fitting bends are commonly produced on site to meet a specific need by hot induction bending or cold bending.A elbow means a specific pipe fitting bend as per the standard ANSI/ASME B16.9 (or EN 10253,or other pipe fittings standards).Commonly the elbows have a bending radius of 1.5D or 1D (Here the D means nominal diameter of this bend),which are called “Long Radius elbow (LR elbow)” or “Short Radius elbow(SR elbow)“.And the angle of an elbow is 45 degree or 90 degree usually,some times there are also custom-designed elbows which are 30 degree,60 degree,180 degree or other angles.

Specifications:

FAQ:

Our company is China's largest pipeline equipment industrial base - salt mountain, the existing staff 120 people, covers an area of 100000 square meters, is located in the bohai sea economic development zone, taking mengcun hui autonomous county, located in "China pipe fittings of the township", covers an area of 32000 square meters, consists of four branch, east is near bohai sea, south according to jinan, north of Beijing and tianjin, the beijing-shanghai railway, The beijing-Fuzhou expressway is 100 kilometers away from Tianjin Xingang and 200 kilometers away from The Capital International Airport, making the transportation very convenient. Our company has the international advanced level of production equipment, sophisticated testing equipment and strong technical force. The introduction of 3000 tons of advanced performance hydraulic press and large medium frequency push machine, and other cold forming, hot extrusion, forging, welding, heat treatment processing, surface treatment and other production equipment a total of 22 sets; In order to ensure the quality of products, our 8 QC personnel strictly control every link of production and processing: incoming material inspection, processing inspection and final delivery inspection. At the same time, we have introduced more than 10 sets of testing equipment including X-ray testing, magnetic particle testing, ultrasonic testing, direct spectrum reading, metallographic analysis, material tensile test, hardness test, etc., to ensure that our products meet international standards.