Metal Sintering Furnace For Carbon Sensitive Metal , Tungsten Alloy

Metal Sintering Furnace For Carbon-Sensitive Metal, Tungsten Alloy

This sintering furnace is applicable for and not limited to hard alloy products, high magnetic products, cermets products, ceramics products.

Functions:

*Furnace body positive pressure leakage detection

*Furnace body negative pressure leakage detection

*Vacuum sintering

*Partial sintering

It including:continuous,intermittent and static.

*Vacuum cooling

*Rapid cooling

Systems:

*Electrical control system

*Heating system

*Vacuum system

*Cooling water system

*Rapid cooling system

*Safety system

*Auxiliary system

Technical details

• Valid working zone size:600mm × 600mm × 1200mm
• Maximum loading capacity:1500kg,it depends on the product type.
• Maximum design temperature:1300℃
• Working temperature:1200℃
• Heating mode: graphite rod resistance heating
• Temperature control mode:3 zone independence temperature control
• Vacuum rate: in the empty furnace, clean and cold state, the vacuum degree reaches 1x10^-5 Torr (1.33x10^-3 Pa) after starting the pump units for 60 minutes.
• Leakage rate:≤6.65X10^-1 Pa/h(In the empty furnace, clean, cold state, within 24 hours of the average)
• Heating rate:5-10 ℃/min (full loading)
• Rapid cooling time:≤5h (Annealing temperature drops to 100℃)

       Zhuzhou Ruideer Intelligent Equipment Co., Ltd. is a manufacturer of powder metallurgy solutions for the whole industry chain. It integrates process development, production, sales and coating services of sintering furnace, PVD coating furnace and CVD coating furnace. Ruideer has standardized workshops and office buildings, covering an area of more than 19,000 square meters, with more than 170 employees. Ruideer’s productivity reaches 120 sets of pressurized sintering furnaces per year, 500,000 pieces of PVD coating per month, and 250,000 pieces of CVD coating per month.

In the past years, Ruideer has been rated as a national high-tech enterprise, a national-level Specialized and Sophisticated enterprise (appointed as a national key little giant enterprise in 2022), a little giant enterprise in Hunan Province, and a single champion of pressure sintering furnace in Hunan Province, and gained 85 intellectual property authorizations.

Nearly 400 sets of degreasing gas pressure sintering furnaces and 180 sets of degreasing vacuum pressure sintering furnaces have been produced. In order to continuously meet and exceed customer needs, Ruideer provides customers with "targeted application, key development, and tailor-made" characteristic services. The products are sold both at home and abroad (US, Russia, EU, Japan, Ukraine, South Korea, Vietnam and other countries), providing 24-hour response services to domestic customers. Ruideer's products have been widely used in the cemented carbide, ceramic, MIM stainless steel, semiconductor industry.

In line with the enterprise spirit of "quality-oriented, continuous innovation, service satisfaction, unity and hard work, and common development", Ruideer is guided by market demand and business development, supported by key technologies, closely following customer needs, and is committed to serving customers with stable and reliable technical products and contribute to the application in the field of powder metallurgy!

Our standard sintering furnace model include (but are not limited to):

• Gas pressure sinteing integrated furnace（1MPa/2MPa/6MPa/10MPa)
• Debinding vacuum sintering integrated furnace
• MIM stainless steel sintering furnace
• Silicon nitride sintering furnace
• Silicon carbide sintering furnace
• Metal sintering furnace (Mo/W heater)
• Vacuum brazing furnace
• CVD coating furnace