Tesla F50 4 Pot Brake Kit 330*28mm Drilled Slot Disc

Jekit Tesla F50 4 Pot Car Brake Kit 330*28mm Drilled Slot Disc

potential risks:
Due to the need for heat dissipation, the brake system is completely exposed to the erosion of the complex road environment. The mud, water, electrolyte, and oil on the road will all affect the brake system.
The friction work surface of the brake is adhered to by oil and dust, which will reduce the friction coefficient and cause the brake efficiency to decrease;
The running track of the brake assembly is blocked by dust, and the phenomenon of "partial wear" may occur, which reduces the effective friction area and reduces the braking efficiency;
Brake whistling sound caused by aging of brake system components;
The brake components are corroded and rusted. For example, the piston of the wheel cylinder is protected by a rubber dust cover. Once the rubber is aging, moisture enters the working surface of the wheel cylinder and causes rust, which will affect the brake onset time.
The brake heat dissipation channel is blocked by muddy water and dust, which can easily cause brake failure in long downhill road conditions.
The tire rim is seized with the car wheel hub, and the tire is difficult to remove.
To sum up, the brake system is the most important component of a car. It is related to the life and safety of the drivers and passengers. It may not be felt at ordinary times, but in high-speed driving or special road conditions, a well-functioning brake system can save lives. Therefore, reasonable maintenance of the brake system is very necessary.

In addition to regular inspections and timely replacement of worn friction components, the brake system should also be regularly maintained:
Use solvent cleaning agent to clean the surface of the brake friction component and its heat dissipation channel. Be careful not to use cleaning agents containing lubricating ingredients and avoid soaking rubber.
Use high temperature resistant (above 600°C) and impact resistant lubricants at the mutually moving parts of the brake friction components to play the role of lubrication, auxiliary heat dissipation and filling, and avoid partial wear. Be careful not to use lubricants that are not resistant to high temperatures, such as butter, as they will have a counterproductive effect once they are burned dry.
Use high temperature resistant (above 600°C) and impact resistant lubricant on the back side of the brake friction assembly and other parts to eliminate the brake squeal.
Use high temperature resistant (above 120°C) lubricant at the positioning pin of the brake cylinder to ensure the effective time of the brake. Note that lubricants that are not resistant to high temperatures such as butter cannot be used.
Apply a long-term protective agent to the rubber dust cover of the brake cylinder and the rusty parts to protect the normal operation of the piston and ensure the effective time of the brake.
Apply long-lasting lubricant to the joint surface of the tire rim and the automobile wheel hub to avoid seizure.
Note that the brake system is related to the personal safety of the drivers and passengers. If incorrect products, fake and inferior products are used, or improper operation, it is very easy to cause accidents, so be sure to use formal channels at a qualified service provider. , Products of well-known companies, such as the Jekit brand, to ensure safety.

Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has production equipment and skilled front-line employees. Our boss has been engaged in the transformation of automobile braking system since 2011, have about 10 years of experience in this industry. Since 2017, we have set up our own factory, which can provide you with the best price and the best quality products. We specialize in producing aluminum alloy center cap and bracket, which can be customized according to different car models. Meanwhile we also sell complete set brake kit included brake calipers/brake disc rotors/brake pads/brake hose/aluminum center cap and brackets. Our products have strict quality control from the procurement of raw materials to the sale of finished products. Our company purpose is customer first, trying our best to meet the needs of customers. Our company's products are sold worldwide. With excellent quality and reasonable value, quality service, to win the trust and praise of our customers . Warmly welcome to visit our company and factory. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits. We are looking forward to receiving your enquiry soon.