Surface Protection Anti-Corrosion Coatings Flaoting Bridge Pontoon Emergency Equipment

General introduction of Surface Protection Anti-Corrosion Coatings Flaoting Bridge Pontoon Emergency Equipment

Surface Protection Anti-Corrosion Coatings Flaoting Bridge Pontoon Emergency Equipment is a kind of heavy pontoon equipment. It is proper for erecting floating bridges MLC80 to guarantee tracked load 72t or wheel load fewer than 83t to cross over the rivers whose present velocity is less than 2.5m/s. Power pontoon bridge can also be used as transporting rafts of 20t, 40t, 65t, and 85t.

A whole set of power pontoon bridge contains of 8 interior bays (each interior bay is equipped with 2 x OBMs), 2 ramp bays, 10 transport vehicles and supporting equipment.

MAIN TECHNICAL DATA of Surface Protection Anti-Corrosion Coatings Flaoting Bridge Pontoon Emergency Equipment

Main size of the pontoon body

Width 8.3m

Carriageway width5 m

Available velocity of flow

Vehicle loading 2.5m/s

Bridge erection 2.5m/s

Ferry with full load 2.5m/s

Design Load MLC80

Tracked load 72t

Wheel load 83t

Pontoon shape depth 0.8m

Transport vehicle of Surface Protection Anti-Corrosion Coatings Flaoting Bridge Pontoon Emergency Equipment

Span Of One Whole Set 104m Emergency Equipment Power Pontoon Bridge Transport vehicle is refitted by 8×8 wheeled cross-country truck, with turning rack, mobile platform, stable support leg, hanger frame, hydraulic system and electrical system on it.

The transport vehicle is used to fold, load and transport interior and shore bays as well as to transport and erect gangplank.

COMPONENTS

Interior bay

Interior bay is used to construct pontoon bridge and ferrying raft. An interior bay weights 10t. It is combined by 2 bow pontoons and 2 roadway pontoons. The main size of unfolded interior bay is 10m of length, 8.3m of width and 1.35m of height with 5m of carriage way.

Each bow pontoon of interior bay has installed one set of power system which is made up of Outboard engine, reversed frame, operation handle, battery, control box and oil tank.

China Harzone Industry Corp., Ltd. ,built in 1967, is the subsidiary of China State Shipbuilding Corporation Limited(CSSC) and one military enterprise whose conservation was given priority status in China.
 

Harzone Industry has the qualification of design, manufacturing and installing various steel products: emergency mechanized bridges; temporary and permanent steel bridges such as Pontoon Bridge, Bailey Bridge, Truss Bridge, Suspension Bridge, Girder Bridge and Cable Stayed Bridge; steel structures for industrial workshops, commercial buildings and habitation buildings; special equipment such as power transmission tower, television tower, radio tower, microwave tower, communication tower, and railway steel pole.
 

Harzone Industry has the first-grade steelwork manufacturing qualification; has the ISO9001-2000 quality system, the ISO14001-2004 Environmental Management System, and has GB/T28001-2001 Occupational Safety Management System Certification.
 

Harzone Industry owns two Production Bases, one Research & Design Department in Hubei province, and one subsidiary company in Beijing. Our products have been exported to over 40 countries in Asia, Africa and Latin America.