Aluzinc Galvalume Steel Coil Cold Hot Rolled Thickness 0.12mm-1.5mm

Aluminium Zinc Coilsr Zincalume Gl Aluzinc Galvalume Steel Coil Thickness 0.12-1.5mm

Product Name	Galvanized Steel Coils
Thickness	0.14mm-1.2mm
Width	610mm-1500mm or according to customer's special request
Tolerance	Thickness: ±0.03mm Length:±50mm Width: ±50mm
Zinc Coating	60g-275g
Material grade	A653, G3302, EN 10327, EN 10147, BS 2989, DIN 17162 etc.
Surface treatment	Chromated unoiled, galvanized
Standard	ASTM, JIS, EN, BS, DIN
Certificate	ISO, CE
Payment terms	30% T/T deposit in advance, 70% T/T balance within 5 days after B/L copy, 100% Irrevocable L/C at sight, 100% Irrevocable L/C after receive B/L 30-120 days, O/A
Delivery times	Within 30 days after the receipt of deposit
Package	First with plastic package, then use waterproof paper, finally packed in iron sheet or according to customer's special request
Application range	Widely used for roofs, explosion-proof steel, electrically controlled cabinet sand industrial freezers in the residential and industrial buildings
Advantages	1. Reasonable price with excellent quality 2. Abundant stock and prompt delivery 3. Rich supply and export experience, sincere service

Finishing:

Finishing is a cold rolling process of galvanized steel with a small amount of deformation for one or more of the following purposes. Improve the surface appearance of galvanized steel plate or suitable for decorative coating; So that the finished products do not see the processing of the phenomenon of slip line or fold temporarily reduced to the minimum.

What is the use of galvanized coils

Galvanized coil is a thin sheet of steel dipped into a molten zinc tank, so that the surface of the sheet is attached to a layer of zinc. Galvanized coil can be divided into hot rolled galvanized sheet coil and cold rolled hot galvanized sheet coil, the current main use of continuous galvanized process production, that is, into a coil of steel plate continuous dip in the melting of zinc plating tank made of galvanized steel plate.

Because galvanized coil has strong corrosion resistance, good surface quality, conducive to deep processing, economic and practical characteristics, so it is widely used in construction, household appliances, automobiles, containers, transportation and household industries and other fields. Especially steel structure construction, automobile manufacturing, steel warehouse manufacturing and other industries.

Defects in galvanized coils

Galvanized roll is easy to fall off, scratch, passivation spot, zinc grain, thick edge, air knife striation, air knife scratch, exposed steel, inclusion, mechanical damage, poor performance of steel base, wave edge, ladle, size, imprint, zinc layer thickness, roll printing and other defects.

The main reasons for the shedding of zinc layer of galvanized coil are surface oxidation, silicon compound, dirty cold tie emulsion, too high dew point of oxidizing atmosphere and protective gas in NOF section, unreasonable air-fuel ratio, low hydrogen flow, low oxygen infiltration in furnace, low temperature of strip into pot, low furnace pressure in RWP section and air suction in furnace door, low furnace temperature in NOF section. Oil evaporation is not enough, zinc pot aluminum content is low, the unit speed is too fast, insufficient reduction, zinc liquid residence time is too short, thick coating.

Jiangsu Irunt Steel Group Co., Ltd. is located in Wuxi City , Jiangsu Province, China, which is the largest steel production base. After 30 years of efforts, it has grown from a family factory to a group company.

The group company mainly produces and sells a series of steel products such as steel pipe, steel coil, steel plate, copper pipe, copper plate, copper strip, aluminum pipe, aluminum plate, galvanized steel pipe, galvanized coil, galvanized plate and so on.The group company has established five platforms, including three production plants and two processing plants. At present, it is still expanding its production line, basically forming a development model of integration of production, processing and sales.

Our annual production capacity of various specifications is about 1 million metric tons. In addition to being a supplier of our series of products, the group company is also committed to expanding its commitment to customers by strengthening services and adding new facilities. A dedicated team is responsible for providing technical support, recommending the correct use of steel, and assisting customers to give full play to their products.

Over the years, we have opened up new markets in Africa, Southeast Asia, the Middle East and America. Our best service and excellent quality have led long-term partners in many countries and established continuous business relations with all customers. Our principle is "service first, sales second". Most of the time, we have comprehensive inspection and procurement to control the quality of finished products. We will have a professional inspection team to test each delivery of products.

Since its establishment, in line with the mission of "contributing high-quality products and services to the world" and the core values of "customer first, excellence, coexistence and win-win", we ensure that we can deeply cooperate with all our friends in the field of iron and steel, and win more affirmation and praise from the market and customers with its high-quality products, perfect product team and thoughtful service, I believe tomorrow will be better!