1600C Dental Ceramic Sintering Furnace 2000W For Zirconia

Dental Zirconia Sintering Furnace Featrues

1. Automatic Lifting up and down

2. High temperature chamber material, resistance high temperature 1700 ℃

3. Programmable controlled,after sinter, the tray will automatic come down to reduce whole heating time

4. 7" Larger Touch panel with PC interface

Technical parameters of dental zirconia sintering furnace

Precautions for sintering Furnace Use

1.Cut off the power when the furnace is not in use.

2. clean the furnace every two months.

Clean Furnace Method:

1. Break waste zirconia (white zirconia) into small pieces of 5-10 mm size.

2. Take 4-6 pieces and place them in the sintered plate (inside the crucible), cover the lid, then take 8-10 pieces and place the sintered plate in the middle of the furnace.

Sintering program:

room temperature----10℃/ min heating rate-heating to 1600℃-----insulation for two hours-------natural cooling.

Burn repeatedly until the white zirconium color permeability is normal and the furnace is clean.

Yucera, located in Shenzhen, China, is one of the top three manufacturers of high quality total solutions for dental applications in China. Our company manufactures zirconium blocks, lithium disilicate and CAD CAM. And we also supply 3D printers, intraoral scanners, laboratory scanners, sintering furnaces, porcelain ovens, burs and other materials. We sell our products in over 100 countries and have dozens of agents.

More information about the Yucera is available at yucera.com.

COMPANY CONCEPT