Firestone W02-358-3002 Industrial Air Springs Pneumatic Bellows Contitech SZ 37-10 P02 1/8 NPT X2 Sleeve

Firestone W02-358-3002 Pneumatic Bellows Contitech SZ 37-10 P02 1/8 NPT X2 Sleeve Industrial Air Springs

Cross reference

The detailed Specifications and techical data

The top plate and bottom plate blind nuts qty: 2pcs

Air inlet: 1/8NPT x2, Both Ends

Applications: Industrial machines or others

HS Code: 8708809000
INDUSTRIAL BELLOWS ACTUATOR
2M1A-0 ASSY
AIRSPRING
REVERSIBLE SLEEVE TYPE
5/8-11X1.00" PLASTIC STUDS WITH 1/8" NPT PORTS BOTH ENDS

Other model

Firestone style 2M1A

1/8 NPT, each end, brass studs

Firestone assembly number: W02-358-3004/ W02 358 3004 / W023583004 / WO2-358-3004 / WO2 358 3004 / WO23583004

Air spring can be used in motocycle

In order to alleviate and attenuate the impact and vibration of the motorcycle due to the unevenness of the road during driving, to ensure the smoothness and comfort of driving, and to improve the service life of the motorcycle and the stability of the operation, the motorcycle is equipped with a shock absorber. Vibrator device. The air spring is a very good shock absorbing element, which can slow down the vibration caused by the uneven road to the body and the rider and the occupant, reduce the inertial force on the body and the occupant, and restrain the elastic wheels caused by the uneven road. continuous beating, improving the grounding of the wheels.

Except from motocycle, air spring also can be used in industrial machinery. When it used, air springs are used to isolate shock and vibration in heavy machinery, such as presses and injection molding machines.

Advantages

1. Affordable
In most cases, the initial cost is approximately 50% lower than a traditional pneumatic or hydraulic cylinder of the same force. The larger the size, the greater the savings.

2. A wide range of
Pneumatic actuators are available in diameter sizes from 2.2 inches to 37 inches. Strength capacity is 100,000 lbs. Travel up to 14 inches.

3. Durability
Durable Air Springs

4. No internal rod, piston or sliding seals
Inside the actuator, there are no internal rods, pistons or sliding seals like many traditional cylinders, which is an advantage in applications where dirt or grit would corrode traditional cylinder seals.

5. Frictionless
As there are no sliding seals, the actuator has no separating friction.

6. Flexible
Actuators are suitable for various media, liquid or gas

The reated picture

Guangzhou Guomat Air Spring Co., Ltd. is located in Guangzhou, about 15min’s drive from Baiyun Airport. Our mainly products are air spring, rubber bellows, air suspension spring, air suspension compressor and refitted suspension system. They are widely used in bus, truck, cabin, vehicles’ seat, luxurious car and industrial machine field.

AIRSUSTECH is another brand of Guangzhou Guomat Air Spring Co., Ltd. 

AIRSUSTECH is focus on industrial air spring.

GUOMAT Factory gate：

Established in 2008, Our company covers 20,000㎡ and is located in Taihe Town Baiyun District. With the rapid development of our company, we are equipped with modernized workshop and advanced rubber air springs equipments now. We are the first company who started air spring business and has become one of the largest air spring manufacturing bases in China.

In 2017, we launched a collaboration with High Tech of US customers to customize the products of our customers and the logo of our customers. Every year, there are about 10,000 orders. In continuous cooperation, the products meet the international inspection standard ISO/TS16949:2009, and the customers are very satisfied with the products produced. This is our high recognition from American customers and also gives us Great motivation.

In 2018, we started cooperation with German GmbH, mainly industrial air springs, which are suitable for industrial equipment. We have successfully developed and produced the natural air-seal of the skin to reach the 700mm flanged air spring, the customer's annual demand is a few hundred.

With the development of business and demand for customers, our company introduced business with TomLog Corporation in 2010, our strategic cooperative partner in Taiwan. Then we developed air compressor program and air spring related business, in 2015, America Goodyear Corporation met with the transfer of shares in the North American plant, our company was granted with sale agent for air springs in China, providing more choice for our customers. Our company adopts the most advanced domestic air spring processing equipment and international production technology. Combined with unique production process, our company strictly execute international standards for production and spare no efforts to create the world-class products. We will endeavor to make air spring widely used at home and abroad, and let more and more customers to enjoy the best damping effect.