OEM ODM Atomizing Spray Bottle Oxygen Injector 140KPA High Pressure

regeneration of new cells Atomizing spray bottle Oxygen Injector high pressure

Activates subcutaneous cells Atomizing spray bottle Oxygen Injector high pressure

face essence liquid Atomizing spray bottle Oxygen Injector high pressure

toner Water Spray Oxygen Injector of high pressure face moisture essence supply

Product Description

USB rechargeable portable Facial Mini Moisturizing Nano Water Spray Oxygen Injection Injector of high pressure nano spray water

2021new arrival :Refresh your skin on a daily basis with Oxygen Water Facial Spray

Skin hypoxia: Causes poor self-renewal ability of the skin, rough texture, thickened facial pores, fine lines, pigmentation, dark circles under the eyes, and a dull and yellowish complexion. Hypoxia causes many girls to have dry skin, lack luster, and even lose elasticity at a young age.
Healthy skin requires sufficient nutrition, but nowadays, due to increasingly severe air pollution, the oxygen content in the atmosphere is constantly decreasing. If the skin lacks oxygen, its metabolism will slow down and it is prone to sensitivity, thus accelerating skin aging and causing many problems such as yellowing, dark spots, wrinkles, and even disrupting the balance of oil secretion, making the skin dull or dull. Scientific research has shown that the flow of active ingredients and oxygen can cross the natural gaps between cells, which can update the cell and external circulatory system and have a regenerative effect on the cortex.

The oxygen injection instrument can inject 98% pure oxygen and active nutrient essence into the skin basal layer, replenish the needed nutrients for the whole body cells, increase the cell elasticity and activity. The oxygen injection instrument also combines the multi-functional live cell regeneration, which has a good effect on the deep cleaning of all kinds of skin, the repair of damaged skin, the regeneration of new cells, and the disappearance of pigmentation. It can improve the wrinkles and looseness caused by skin hypoxia, Pigment precipitation and other issues.
High pressure oxygen injection. 95% pure oxygen and active substances are injected into the basal layer of the skin through needle free pressure oxygen injection at a pressure of 2BAR. The oxygen injection and activation device is equipped with a specially designed stainless steel injection gun, which can inject oxygen and nutrients into the deep layer of the skin by simply pressing against the skin. Treatment and improvement of skin tone, wrinkles, sagging, pigmentation, fading, recovery skin, smoking skin, and mature skin problems caused by hypoxia.

Oxygen injection equipment can improve skin texture, promote local blood circulation, and improve metabolism. Activates subcutaneous cells, improves skin roughness and rough pores, and makes the skin delicate. It can provide the most effective and safe oxygen therapy for the human body, and can achieve certain cosmetic effects. An oxygen injector is an ion instrument that injects nutrients into the skin.

Tips

The product used by the spray gun must be a water-based product, and the product with high concentration and viscosity should be diluted before use

Please inject water or alcohol and spray it again before use to clean the inner wall of the spray gun

After each use, you must pour clean water and clean it again. After spraying, spray it for a few seconds to avoid clogging or water leakage of the spray gun due to the product freezing.

Do not leave the product in the spray can for a long time, use as much as you want to avoid blocking the inner wall of the spray gun

Color selection: regular black with red/customizable: silver with green, gold with red, rose gold with pink
Product name	Handheld Oxygen Injector	Product model	ZM142
Battery capacity	850mAh	Body material	PC+ABS
Rated voltage	3.7V	Product size	46.3*169.4*154.37mm
Rated power	8W	Net weight	220g
Charging time	120min	Gross weight	470g
Charging voltage	5V	Package size	12*20.6*5.7cm
Charging interface	TYPE-C	Outer box size	59*43*38.5
Packing quantity	40	Packaging style	Book box/inner pearl cotton

Oxygen Facial Machine, Nano Water Oxygen Spray Home SPA Facial Care For Deep Moisturizing Beauty

New technology spray 2.0
Multi-combination and instant high-pressure atomization decompose small molecules 5-50 microns, reaching the deep layer, deep Moisturizing all day.

Spray port 2.0
Fine molecules penetrate the skin instantly and penetrate to skin layer

Microcomputer constant pressure jet 2.0
The spray force and quantity are stable and remain unchanged, even spraying.

Battery working time 45 mins
Increase battery capacity

60S effective hydration
High pressure oxygen injection, better skin absorption.

Extract oxygen from the air and compress it into a high concentration of active factors through technical processing.

Skin solution are delivered to the deep layers under 140Kpa pressure, refresh your skin by new way.

Low pressure ,only stays on the skin surface

Optimal pressure, excellent rejuvenation

Excessive pressure ,damage skin epidermis

8 years OEM/ODM

Labeling LOGO
Contact customer service for details

Ordinary oxygen injection instrument
Small spray , large water droplets, can't deeply moisturize, easy to ruin makeup

Hyperbaric oxygen injector
Large spray ,almost no large water droplets, reaches the skin layer , not easy to ruin makeup

3 mins per day
Easily have supple skin
Pure dew/water
Essence
Beauty salon water products

High-concentration products and distilled water are mixed in a ratio of 1:10, and the use effect is better. Too high water density will cause blockage or poor effect

2-stage adjustment, free switching
Switch the valve to adjust the spray size
1st gear
The fine mist is gentle (moisturize when make up)
2 gears
Daily care
Newly upgraded variable frequency motor, easily switch to the suitable gear for you

0.3mm Spray gun pinhole 0.3mm
45 degree wide angle full face moisturizing

Multi-combination and instant high-pressure atomization to decompose small molecules smaller than 5-50 microns

Delicate and moisturizing straight to the depths, keeping you moisturized all day

140Kpa Pressure 140Kpa
6L/min Flow 6L/min

High-pressure water replenishment
Let maintenance no longer be useless

Data witnesses the absorption and penetration effect, doubles the absorption, awakens supple and shiny skin

140KPA high pressure cleansing pores
Hydration +65%
0.3MM nano atomization
Water content +30%
Full face instant penetration in 60 seconds
Test Case

After matching with hydrating products, can see that the skin is more hydrated and delicate

Ningbo UV Light & Electricity Co., Ltd, located in a beautiful island called Daxie, is a manufacturer of personal care products and high-end UV germicidal lamp in Ningbo, Zhejiang, China. As a Joint-stock enterprise, we are capable in R&D, manufacturing and sales. Xieguang Electronic Factory, the company’s predecessor, was established as early as in 1986. And the successor, Ningbo UV Light & Electricity Co., Ltd now has 30 years’ manufacturing experiences of making UVC lamps and personal care products.

The factory covers an area of more than 30 mu and has over 160 employees. Our company

has its own certificates including ISO9001, CE, RoHS as well as the certificates of sterilization effect, Hygiene license, explosion proof, etc. The subsidiaries including Ningbo Yijiakang electrical appliances Co., Ltd which focuses on personal care products and health appliances with UV, and Ningbo Zhongrun water treatment equipment Co., Ltd which products applied with UV are for water treatment application, and Ningbo Youshiwei electronic Co., Ltd which makes research and development on supporting electronic products. The UV germicidal lamp series of our company is wildly used in the water treatment system, air purification system and health appliance, etc. Ningbo UV Light & Electricity Co., Ltd is the representative company of personal care products and high-quality product in UV germicidal lamp domestic industry.

Now, company has three production bases of UV germicidal lamp in Ningbo, Zhejiang, Fuoshan, Guangdong and Lianyungang, Jiangsu. And in Foshan, Guangdong, there is a supporting production base of electronic ballast, the annual output of UV germicidal lamps and supporting ballasts can reach more than 5 million. The key materials of the UV germicidal lamps are imported, and the clip-sealing machine for the lamp making and high-vacuum-exhaust equipment are tailor-made. What's more, it has established an industry-university-research laboratory with domestic electric-light-source institutions of higher education to improve quality through continuous process innovation and improvement. The company carries out strict quality control of every product and strives to deliver perfect products to customers.

As to the quality management, the company has established quality management system and passed a series of certifications such as ISO9001, ISO14000, CE, and UL. It is the great effort that makes the company's development more formal and international step by step. With strong production and R&D ability, the factory is now an enterprise of diversified development with strict and completed factory management, own brand as well as the ability to design and develop new products and provide OEM services for the customers. And our pursuit for the customer always are on-time delivery, qualified and cost-effective products.

Our main products include personal care products and UV lamps,like hair remover,massage pad, tooth cleaner, face beauty instruments,uvc light,double-ended straight tubes, one-ended straight tubes, one-ended H tubes, high-power water treatment lamps, code cathode lamps, electronic ballasts, sewage treatment equipment and other diversified products that can meet the needs of different customers.