Wireless Portable Interactive Whiteboard CE FCC certificate

IBX-U3 Portable Ultrasound Interactive Whiteboard (Wireless Version)


1. Product Composition
Interactive Stylus:

EWB Sensor:

EWB Sensor can be placed in any position around the writing board.
Calibration operation is required after first use or change of installation position.
Internal batteries are charged by connecting a USB cable to a computer or to a power adapter.
Wireless Dongle:

Connect computer USB interface to receive data sent by EWB Sensor
* Power Adapter:

Charging EWB sensor internal batteries, if charged with computer USB interface, no need for this accessories (Package without Power Adapter)
2. Connectivity
USB Cable or Wireless Dongle

3. Specifications
Interactive Stylus:
Battery:1 AA 1.5V battery
or 1 AA 1.2V rechargeable battery
or 1 AA 3.6V rechargeable battery
Battery life:30-60 hours
Dimensions:152mm * 25mm
Weight:50g
(Package without battery )
EWB Sensor :
PC Systems:Windows,MAC
Work area:3m * 1.5m
Power:USB or Internal battery
Battery life:3 hour charge time for 5 hours
Dimensions:227mm * 43mm * 11mm
Weight:100g
Power Consumptions:0.5W
Tracking Technology:Ultrasound
Wireless Technology:Bluetooth
Wireless Power:<10mW
Wireless Dongle:
PC Systems:Windows,MAC
Power:USB
Wireless Technology:Bluetooth
Wireless Power:<10mW
Power Adapter:
INPUT:AC100-240V,50/60Hz,0.5A
OUPUT: DC5V,≥500mA

4. Operation
Tun on
Long press power sign in upper left corner, turn on
Tun Off
On-state,Press the power sign in the upper left corner to turn off.
(Automatically shut down after 30 minutes of no operation)
Calibration
When the position of EWB Sensor, the position and area of projector change for the first time, calibration operation is needed.

• Turn EWB Sensor on and connect to the computer via USB or wireless.
• Press the Stylus key2 for more than 3 seconds in a 2 cm radius semicircle near the center of the EWB Sensor front end. Hear a buzzer sound and indicate to enter the calibration mode. Meanwhile, the pointer on the screen jumps to the position of the first calibration point.
• As shown in the projection screen above, the point pointed by the arrow is the position of the calibration point. Click on the calibration point with the tip of the stylus. If the current calibration point succeeds, a click will be heard. At the same time, the pointer jumps to the next calibration point. When all nine calibration points pass, three clicks will be heard to indicate the success of calibration.
• If the calibration operation is wrong, please hold down the key1 of the stylus for more than 2 seconds, hear two short sounds, and exit the calibration mode at the same time.
• In the calibration mode, if there is no operating stylus for more than 30 seconds, two short sounds are heard and the calibration mode is automatically exit.

5. Indicator status light
Light off: Power off
Red light: Power on or fully charged
Red light Flashing: Low battery
Green light: Normal writing
Green light Flashing: Battery Charging
Orange light: Wireless disconnect
6. Package Contents
1 Interactive Stylus
1 EWB Sensor
1 Wireless Dongle:
1 USB Cable for Charge
1 Mounting plates
1 Adhesives strips
5 Stylus tips

7. Our Company Profile

ABOUT US 

Founded in 2007, Shenzhen iBoard Technology Co., Ltd. is located in Shenzhen, Guangdong Province, China. It has 18 years of experience in the education Informationization industry. Now we’ve become into a smart education solution provider and operation service provider, specializing in R&D, production and sales of smart education cloud platform, interactive teaching software in classroom, interactive whiteboard software and infrared touch frame, interactive whiteboard, laser projector, all-in-one multimedia device, interactive LED display, advertising display and digital signage etc. In addition, we’re also a national high-tech enterprise and key software enterprise of science, industry and trade.
iBoard has established a complete ISO9001 quality management system, ISO14001 environmental management system and OHSAS18001 occupational health and safety management system. The products are approved by 3C, CE, FCC, RoHS and many other product certificates.
We have rich experience in OEM/ODM service for overseas customers. And our products are sold to more than 80 countries around the world. Our goal is to become the world's number one interactive device and smart campus solution provider.
With the long-term stable development of the company and the strategic deployment needs in 2019, we has once again expanded the scale and moved the Dongguan branch to Gongming district of Shenzhen. The factory area has been upgraded from 10,000 ㎡ to 23,000 ㎡; The R&D center, purchasing center and after-sales center have settled in together, cooperating with the production lines to improve production efficiency and focus on providing customers with better products and services. You’re welcome to visit our company and we’re looking forward to working with you.