Wall Thickness 0.71mm - 2.11mm Seamless Nickel Alloy Tube Corrosion Resistance

ASTM B725 Alloy 400 / UNS N04400 Nickel Alloy Welded Tube / Pipe

Alloy 400 / UNS N04400 has excellent resistance to corrosion by many reducing media such as sulfuric and hydrochloric acids. It is generally more resistant to corrosion by oxidizing media than higher copper alloys. Alloy 400 / UNS N04400 resists pitting and stress corrosion cracking in most fresh and industrial waters. It has good resistance in flowing seawater, but under stagnant conditions, pitting and crevice corrosion is induced. Alloy 400 / UNS N04400 is probably the most resistant to hydrofluoric acid in all concentrations up to the boiling point, of all engineering alloys. Monel 400 is notable for its toughness, it does not show embrittlement tendency at cryogenic temperatures. It is work hardenable.

1. Material Grade: UNS N04400, N10276, UNS N10001, UNS N10665, N08800, N08825; etc

2. Outer Diameter: 6mm-457mm

Wall Thickness: 0.75mm-20mm

3. Length: Normally fixed length 6m, can as per customer’s requirement

4. Standard: ASTM B725; ASTM B167; ASTM B444; ASTM B622 etc

Nickel Alloy 400 Chemical composition:

About MTSCO:

Who MTSCO is?

MTSCO established in 2006, during many years’ development, now becomes a large and professional industrial piping system provider, serving customers from more than 100 countries and regions.

What products can MTSCO provide?

What materials can MTSCO provide?

Austenitic: 304/L/H/N,316/L/H/N/Ti,321/H,309/H,310S,347/H,317/L904L

Duplex steel: 31803,32205,32750,32760

Nickel Alloy:

UNS N10001, N10665, N10675, N06455, N06022, N10276, N06200, N06035, N06030, N06635, N10003, N06002, R30188, N06230, R30556

UNS N06600, N06601, N06617, N06625, N07718, N07750, N08800, N08810, N08811, N08825, N09925, N08926

UNS N04400, N05500

Precipitation-hardening Steels: 254SMO/S31254, 17-4PH, 17-7PH, 15-7PH

Nickel: N4/UNS N02201, N6/UNS N02200

How can MTSCO service customers?

MTSCO's ISO9001 Quality System is issued by TUV. Our full and professional inspection reports contain two parts, one is self-inspection of the requirements beyond ISO9001, which is 100% inspected by our own QC; another is 100% inspected by professional QC teams.

Thank you very much for reading this, I wonder if my presentation will help you with your current problem? Looking forward to hearing from you!

VR Visit of Manufacturer

Click the PIC to visit our factory

Who we are?

MTSCO established in 2006, during many years’ development, now becomes a large and professional industrial piping system provider, serving customers from more than 100 countries and regions.