2-64 Layer Multilayer Printed Wiring Board 0.2mm - 10.0mm Thickness PCB Multilayer Manufacturing Process

Product Description:

Multi-Layer PCB is made of multiple etched double-sided boards, an insulating layer (Prepreg) is stacked between the boards, and copper foil is laid on both sides of the outermost layer and then pressed together. Since multiple double-sided laminates are used, the number of layers is usually an even number. The copper foil layer that is pressed inside can be a conduction layer, a signal layer, a power layer or a ground layer. The multi-layer board can theoretically reach more than 50 layers, but the practical application surface is currently up to about 30 layers.

Features:

• Product Name: Multilayer PCB
• Board Thickness: 0.2mm - 10.0mm
• Copper Thickness: 0.5OZ - 12OZ
• Silkscreen Color: White/Black/Yellow/Red
• Solder Mask Color: Green/ Blue/ White/ Black/ Yellow/ Red
• Board Size: Customized
• Multi-Layer PCB Assembly: Yes
• Multi-Layer Wiring Board: Yes
• Multi-Layer Printed Circuit Board: Yes

Technical Parameters:

Applications:

Cesgate Multi-Layer PCB Assembly is a high-performance multi-layer wiring board.The required circuits are made on the front and back surfaces of multiple double-sided boards, and an insulating layer (Prepreg) is sandwiched between the two double-sided boards and then pressed together to form several layers of copper. The construction of the wire is usually an even number of layers due to the use of multiple double-sided laminates. The number of copper wires that can be made by multi-layer boards is the largest, and it is used in more complex circuits. At present, the motherboards used in computers mostly use eight-layer boards because of too many components. Generally, small electronic products, such as mobile phones, tablet computers, etc. Due to the requirement of small size, at least an eight-layer board is required. The more electronic components, the smaller the product size, and usually more layers of PCB are required.

Support and Services:

We offer technical support and service for Multilayer PCBs. Our technical support team provides assistance with the following:

• Design guidance and advice
• Troubleshooting and diagnostics
• Testing and inspection of components
• Updates and maintenance
• Repair and replacement of components

We also provide a range of additional services, such as:

• Custom design and engineering
• Fabrication and assembly
• On-site installation and training

Our technical support team is available 24 hours a day, 7 days a week, to ensure that you have the support you need when you need it.

Packing and Shipping:

Packaging and Shipping of Multilayer PCB:

The Multilayer PCB will be packaged in a cardboard box that is waterproof and shockproof. The box will be lined with foam for extra protection. The box will also be labeled with the product name and description for easy identification. The box will then be shipped with a reliable courier service, such as UPS, FedEx, or DHL.

FAQ: