GCr15 CZ Purlin Roll Forming Machine , Steel Cold Roll Forming Machine

CZ Purlin Steel Cold Roll Forming Machine Fully Automatic CZ Making Machine

CZ interchangeable machines can produce C and Z rafters. It can realize the conversion of C and Z rafters by changing the upper and lower positions of one roller. It takes half an hour to save time. It can also adjust the lateral distance of the roller to adjust the width of C or Z rafter. High precision and time saving to increase production.

Technical Specifications:

All the technical parameters are also made as per the customers' requirements.

The molding host machine:
1. Feeding: guide shaft + guide wheel
2. Leveling: upper three-down four + two lead, full solid axis modulation heat treatment, and polishing plating
3. Main molding: 18 constitutive
4. Reinforcement: one straight rib
5. Straightening: Ten-roller CZ special two-axis alignment + four-roller two-axis alignment, a total of two straightening units
6. Lead: with transmission, upper and lower shaft gear drive
7. Punching: punching single hole + punching double hole after forming, and matching single hole Φ14mm and double hole type 26*16mm each set
8. Shear: After the forming, the electrodeless shearing system does not need to be changed.

Control system:
1. Main control cabinet: 1 set
2. Changeover mode: (electric) changeover, (three changeover motors: 0.75*3kw)
3. Changeable distribution box: 1 (installed in the middle of the rack)
4. External controller: 1 (It is convenient to jog control forward and backward during the production process and debugging process)
5. Main accessories origin: PLC, touch screen, relay, Proximity switch, length encoder

The hydraulic system for this type of machine:
1. Hydraulic motor: external five-star piston linkage
2. Hydraulic station: hydraulic station power 22KW, Fuel tank volume 500 liters

The discharge machine
1. Load: 5 tons

2. Tightening method: hand crank. The center of the four links is outwardly supported
3. Brake: Spindle double holds tight.

Mechanical detail picture

Wuxi Hengruiyang Technology Co., Ltd is a manufacturer of roll forming machine. At present, our products have been exported all over the world, and maintained good cooperative relations with customers.