15M LED High Mast Light Pole Highway / Airport High Mast Lighting Pole ISO 9001

15M octagonal LED High Mast Pole with winch for airport lighting

Quick Information

High mast with raising & lowering gear system is designed for large outdoor areas lighting such as junctions, crossings, roundabouts, flyovers, etc. The raising and lowering gear system improves the maintenance or replacement of the lamps without any hindrance to traffic flow. This system brings down the lamps along with the entire Head Assembly unit for lamp replacement. Raising & lowering gear system

Consists of the following major parts:

Head Frame
Luminaries Ring
Winch
Portable power tool or electrical motor.

Quick Product Description-High Mast Lighting Pole

Application

Truck and bus terminals

railyards

ship docks

ferry terminals

airports

prisons

industrial and commercial sites

international borders

parking lots

Lamp Type:

ACCESSORIES

Mast with continuous tapered polygonal cross section have high load bearing strength oscillation due to wind speed and related stress are fully taken care in the design.

IMPORTANT TECHNICAL FEATURES

FIXED TYPE HEAD FRAME :

Designed with larger Dia. Non corrosive aluminum pulley system for longer life and perfect balancing.

WINCHES :

Winch designed with gear ration 53:1 and without break of clutches. These are self lubricated for sustained trouble free life.

FINISH :

The complete mast with component is fully hot dip galvanized for longer life.

LANTERN CARRIAGE :

We specialize in custom built design, standard lighting design and various types and shapes. The lantern carriage is supported with three numbers flexible 6 sq. mm. S.S. wire ropes from the distributors that can be elevated/lowered electrically and mechanically.

Anchor Bolt Type

OPTIONAL :

The most can be supplied with timer / photo sensor panel for auto control.

Options:

• The High Mast is available in various length, diameters and hole arrangements.

• Multisided or Tapered round variations.

• The High Mast is available in base plate mounted or direct bury installed.

• All High Masts are hot dip galvanized according to EN 1461, and can be powder coated or painted.

• Additional service doors.

• Pre-drilling for removable safety steps is available.

Application:

Company Introduction

Established in the year 1991, we “Jiangsu Milky Way” are based in Jiangsu, China.

We are the one of the leading manufacturers and suppliers of a wide range of electric equipments like:

lighting fixtures, poles, luminaries & other accessories that include: High Mast Poles, Octagonal Poles, Decorative Poles, Swaged Poles & Bracket Design, Commercial & Decorative Luminaries, CFL Luminaries, Industrial Highway Luminaries, Street Light Luminaries, Post Top Luminaries, Flood Light Luminaries, Bulkhead Luminaries, Plant Light Luminaries, Accessories.

The entire range of equipment is manufactured using superior quality raw material and ensures reliability.

These products are extensively used in Offices, Schools & Colleges, Residential Complexes, Resorts, Hotels, Industries, Highways, Petrol Pumps, Yard Lighting & Stadiums.

Estbilsed  in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .

Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on

We have plenty of export experience . Since our first overseas order from Pakstan  in  1991 of 132 KV transmission poels ,our products have been deliveried  to more than 70 contries and areas ,including America,Australia ,Russia  ,Genmery ,Span,Philippines ,Malaysia and so on

To assure our products qualified ,we take steps as follows :

1. Management  team : We have employ the foreign export  to take chaege of the overall managemnt ,especailly the technical managemnt and quality management .

2. Introducing ISO management ,We are awared ISO 9001:2008 certificate . .

3. Lofting and design software :We have  transmisson power pole design software which can help us design all kinds of steel pole  ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly .

4. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore every shipment .

We are always persisting in horzontal cooperation with domestic senior project institute and technical colleges .The enterprise also has an highly qualified team working at R&D ,manufacure ,QC ,aftersales service and other important positions .