Magnum DXi 12 13 5001866236 60mm Truck Propeller Shaft

Support Center Bearing 50 01 866 236 / 5001866236 for Renault 60mm

Points to note about bearing installation and maintenance

From the perspective of use, to ensure that the bearing can work reliably, pay attention to the following points:

1. Improve lubrication quality, control oil pressure, temperature and flow, and strengthen oil filtration.

2. Use fuel and lubricating oil that meet the requirements.

3. To control the temperature status of diesel generator sets, it is disadvantageous to work under the conditions of over-cooling and over-heating. In cold weather, the diesel engine should be warmed up before starting, and the crankshaft should be turned by hand to make the oil enter the friction surface.

4. The surface quality and geometry of bearings and journals should be strictly guaranteed.

5. The bearing clearance should be proper. If the generator set is too large, it will produce impact. If it is too small, the lubrication will be poor and the bushings may burn.

Disassembly of the bearing

Disassembly of the outer ring For the outer ring with interference fit, a few screws for extruding the outer ring are set on the circumference of the shell in advance, and the screws are tightened evenly while being removed. These screw holes are usually covered with blind plugs and separable bearings such as tapered roller bearings. Several cuts are set on the blocking shoulder of the shell. Use a pad to remove it with a press or gently tap it.

The disassembly of the inner ring can be the easiest to pull out with a press. At this time, pay attention to let the inner ring bear its pulling force. Furthermore, the pull-out clamps shown are mostly used, and no matter what kind of clamps, they must be firmly clamped to the side of the inner ring. For this reason, it is necessary to consider the size of the shoulder of the shaft, or study the processing of the upper groove at the shoulder in order to use the drawing fixture.

The oil pressure method is used for the inner ring disassembly of large bearings. Oil pressure is applied through the oil hole provided in the bearing to make it easy to draw. For bearings with a large width, the hydraulic method and the drawing fixture are used together for disassembly.

The inner ring of cylindrical roller bearing can be removed by induction heating method. The method of drawing after heating the part in a short time to expand the inner ring. Where a large number of these bearing inner rings need to be installed, induction heating is also used.

Image description

      Guangzhou Sub-Group Auto parts Co.,Ltd was established in 2000 and is located in baiyun district, Guangzhou, China. We have China's first-class truck auto parts professional capacity and export trade capacity. We have a strong and professional auto parts research team, professional control of product quality and suitable models. We supply high quality auto parts at the most competitive prices. Since its establishment, Sub-Group Auto parts has been dedicated to the production of all kinds of plastic parts for trucks, with perfect production capacity.

      In 2008, established the foreign trade department of auto parts, mainly operating Volvo, scania, FAW, weichai, cummins, dongfeng, American and Chinese auto parts and engineering machinery parts. We have the ability to develop new products that are not in our catalog, and we will do that in a timely manner and do our best to meet customer needs. Our production and development costs are very reasonable. Please contact us according to your special needs. We are glad to cooperate with you. At the same time, our highly skilled and qualified employees are proud to be a supplier of spare parts to global customers.

       We have a strong sourcing capability in the Chinese market. We fully understand the needs of our customers. We offer high quality products, competitive prices and first class service. We hope to establish good business relations and friendship with you in the near future.

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to Mid East(30.00%),Central America(20.00%),North America(10.00%),Eastern Asia(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),South America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?

Mercedes Benz, Man, Volvo, IVECO, DAF, SCANIA, Renault, Ford
FUSO, UD, NISSAN, HINO, ISUZU
FAW, CAMC, JAC, FOTON, DAYUN, DongFeng

CAT,CAT,Komatsu, Hyundai, Doosan, Hitachi, John Deere, Daewoo, Case, XCMG, Sany

4. why should you buy from us not from other suppliers?
1.Our company has 20 years experience in auto parts development and production. Main projects, China Heavy Truck: Weichai, FAW, Yuchai... and imported trucks: Mercedes-Benz, Volvo, MAN, Scandinavia... and construction machinery: Komatsu, Cummins, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German