50 00 819 188 50 01 858 507 55mm Truck Propeller Shaft

Support Center Bearing 50 00 819 188 / 50 01 858 507 for Renault 55mm

Bearing lubricant supply

It is hoped that the bearing package will be opened just before installation. General grease lubrication, do not clean, directly filled with grease. Lubricating oil does not need to be cleaned in general. However, the bearings for instruments or high-speed use should be cleaned with clean oil to remove the anti-rust agent coated on the bearings. Bearings with anti-rust agent removed are easy to rust, so they cannot be left alone. In addition, bearings that have been packed with grease can be used directly without cleaning.

The installation method of the bearing varies with the bearing structure, fit and conditions. Generally, since most of the shaft rotates, the inner ring needs an interference fit. Bearings with cylindrical bores are usually pressed in with a press or hot-fitting method. In the case of a tapered hole, install it directly on the tapered shaft or use a sleeve.

When installing to the shell, generally there is a lot of clearance fit and the outer ring has an interference. It is usually pressed in with a press, or there is also a shrink fit method for installation after cooling. When dry ice is used as the coolant, the moisture in the air will condense on the surface of the bearing when the shrink fit is installed. Therefore, appropriate anti-rust measures are required.

Bearing storage

Bearings are coated with a proper amount of anti-rust oil and packed with anti-rust paper when they leave the factory. As long as the packaging is not damaged, the quality of the bearings will be guaranteed. However, for long-term storage, it is advisable to store it on a shelf 30cm above the ground under the condition that the humidity is lower than 65% and the temperature is about 20℃. In addition, the storage place should avoid direct sunlight or contact with cold walls.

Image description

      Guangzhou Sub-Group Auto parts Co.,Ltd was established in 2000 and is located in baiyun district, Guangzhou, China. We have China's first-class truck auto parts professional capacity and export trade capacity. We have a strong and professional auto parts research team, professional control of product quality and suitable models. We supply high quality auto parts at the most competitive prices. Since its establishment, Sub-Group Auto parts has been dedicated to the production of all kinds of plastic parts for trucks, with perfect production capacity.

      In 2008, established the foreign trade department of auto parts, mainly operating Volvo, scania, FAW, weichai, cummins, dongfeng, American and Chinese auto parts and engineering machinery parts. We have the ability to develop new products that are not in our catalog, and we will do that in a timely manner and do our best to meet customer needs. Our production and development costs are very reasonable. Please contact us according to your special needs. We are glad to cooperate with you. At the same time, our highly skilled and qualified employees are proud to be a supplier of spare parts to global customers.

       We have a strong sourcing capability in the Chinese market. We fully understand the needs of our customers. We offer high quality products, competitive prices and first class service. We hope to establish good business relations and friendship with you in the near future.

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to Mid East(30.00%),Central America(20.00%),North America(10.00%),Eastern Asia(10.00%),Domestic Market(5.00%),South Asia(5.00%),Northern Europe(5.00%),South America(5.00%),Southeast Asia(5.00%),Eastern Europe(5.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?

Mercedes Benz, Man, Volvo, IVECO, DAF, SCANIA, Renault, Ford
FUSO, UD, NISSAN, HINO, ISUZU
FAW, CAMC, JAC, FOTON, DAYUN, DongFeng

CAT,CAT,Komatsu, Hyundai, Doosan, Hitachi, John Deere, Daewoo, Case, XCMG, Sany

4. why should you buy from us not from other suppliers?
1.Our company has 20 years experience in auto parts development and production. Main projects, China Heavy Truck: Weichai, FAW, Yuchai... and imported trucks: Mercedes-Benz, Volvo, MAN, Scandinavia... and construction machinery: Komatsu, Cummins, etc.

5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,DAF,DES；
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German